ON Semiconductor FPAM30LH60, Power Factor Correction, 20 kHz, 253 Vrms 32-Pin, S32EA

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

The FPAM30LH60 is a PFC SPM® 2 module providing a fully-featured, high-performance Interleaved PFC (Power Factor Correction) input power stage for consumer, medical, and industrial applications. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockout, over-current shutdown, thermal monitoring, and fault reporting. These modules also feature a fullwave rectifier and high-performance output diodes for additional space savings and mounting convenience.

600 V - 30 A 2-Phase Interleaved PFC with Integral Gate Driver and Protection
Very Low Thermal Resistance Using Al2O3 DBC Substrate
Full-Wave Bridge Rectifier and High-Performance Output Diode
Optimized for 20kHz Switching Frequency
Built-in NTC Thermistor for Temperature Monitoring
Isolation Rating: 2500 Vrms/min
Motion Control - Home Appliance/Industrial Motor

Specificaties
Kenmerk Waarde
Maximum Switching Frequency 20 kHz
Maximum Sink Current 1mA
Maximum Supply Current 2.65 mA
Mounting Type Through Hole
Package Type S32EA
Pin Count 32
Dimensions 60.5 x 31.5 x 7.3mm
Height 7.3mm
Length 60.5mm
Maximum Operating Supply Voltage 253 Vrms
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 187 Vrms
Width 31.5mm
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tube of 48)
28,556
(excl. BTW)
34,553
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
48 - 48
€ 28,556
€ 1.370,688
96 +
€ 27,129
€ 1.302,192
*prijsindicatie
Related Products
Power Factor Correction (PFC) controllers operate in Transition ...
Description:
Power Factor Correction (PFC) controllers operate in Transition Mode (TM) and Continuous Current Mode (CCM) for a wide-range-mains operation. The PFC controllers embed advanced protection features, which make SMPS more robust and compact, requiring fewer external components.
Texas Instruments integrated controllers for Power Factor Correction ...
Description:
Texas Instruments integrated controllers for Power Factor Correction (PFC) in pre-regulators and PFC converters can achieve near unity power factor and give stable, low distortion sinusoidal line currents. They utilise advanced features and innovative processes such as quantized voltage feed-forward, ...
Texas Instruments integrated controllers for Power Factor Correction ...
Description:
Texas Instruments integrated controllers for Power Factor Correction (PFC) in pre-regulators and PFC converters can achieve near unity power factor and give stable, low distortion sinusoidal line currents. They utilise advanced features and innovative processes such as quantized voltage feed-forward, ...
Power factor controllers with variable CRM, CCM, and ...
Description:
Power factor controllers with variable CRM, CCM, and DCM that enable power factor correction.