Texas Instruments UCC29950D, Power Factor & PWM Controller

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PH
Productomschrijving

Power Factor Correction (PFC), Texas Instruments

Texas Instruments integrated controllers for Power Factor Correction (PFC) in pre-regulators and PFC converters can achieve near unity power factor and give stable, low distortion sinusoidal line currents. They utilise advanced features and innovative processes such as quantized voltage feed-forward, current synthesis, frequency dithering and slew rate enhancement to provide significant performance enhancements.

Power Factor Correction (PFC), Texas Instruments

Texas Instruments Power Factor Correction (PFC) controllers meet IEC61000-3-2 harmonic current limit standards. PFC controllers are designed for AC-DC applications and provide high Power Factor (PF), low current distortion (iTHD), high efficiency and high power density.

Specificaties
Kenmerk Waarde
Maximum Switching Frequency 109 kHz
Start-up Supply Current 7.5mA
Maximum Source Current -1.6mA
Maximum Sink Current 6mA
Maximum Supply Current 18.3 mA
Number of Outputs 1
Mounting Type Surface Mount
Package Type SOIC
Pin Count 16
Dimensions 10 x 4 x 1.5mm
Length 10mm
Width 4mm
Height 1.5mm
Maximum Operating Supply Voltage 18 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 11 V
Prijs Each (In a Tube of 40)
1,746
(excl. BTW)
2,113
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
40 - 160
€ 1,746
€ 69,84
200 - 360
€ 1,399
€ 55,96
400 +
€ 1,26
€ 50,40
*prijsindicatie
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Related Products
The load share controller provides all necessary functions ...
Description:
The load share controller provides all necessary functions to parallel multiple independent power supplies or DC-to-DC modules. On-Board Reference.
Pulse-width modulator (PWM) controllers can support isolated and ...
Description:
Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical ...
The Flyback controllers, Line Level Control (LLC) controllers, ...
Description:
The Flyback controllers, Line Level Control (LLC) controllers, and Primary-Side Regulation controllers offer Crucial energy savings to address the needs of Switch Mode Power Supply (SMPS) designs.All controllers come with integrated soft-start, and protection features from over-voltage, open-feedback, overload, ...
The STCMB1 device embodies a transition mode (TM) ...
Description:
The STCMB1 device embodies a transition mode (TM) PFC, a high voltage double-ended controller for LLC resonant half-bridge, an 800 V-rated high voltage section and the glue logic that supervises the operation of these three blocks. The PFC section uses ...