Schaffner FN2200 Series 50A 1200 V dc Chassis Mount RFI Filter, with Tab Terminals

  • RS-stocknr. 754-6067
  • Fabrikantnummer FN2200-50-34
  • Fabrikant Schaffner
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: HU
Productomschrijving

FN2200 Series

Schaffner FN 2200 series DC filters aid in the control of conducted emissions on the panel side of a PV inverter system, significantly reducing the potential for high-frequency interference panel radiation. The FN 2200 series filters also protect the solar panel from HF stray and leakage currents which can cause pre-mature aging in the PV modules. FN 2200 filters are primarily designed for PV inverters. However, they can potentially also be used in other DC applications within published specifications, such as UPS, DC motor drives or DC quick chargers.

Compact design
Reduces conducted emissions
Helps prevent premature panel aging

Specificaties
Kenmerk Waarde
Maximum Current Rating 50A
Maximum Voltage Rating 1200 V dc
Mounting Type Chassis Mount
Termination Style Tab
Number of Stages Single Stage
Series FN2200
Length 170mm
Depth 95mm
Height 80mm
Dimensions 170 x 95 x 80mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
Power Loss 17W
12 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
100,12
(excl. BTW)
121,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 100,12
5 - 9
€ 95,11
10 - 24
€ 90,41
25 +
€ 85,80
Related Products
Single phase B84111F series offer's optimized leakage current. ...
Description:
Single phase B84111F series offer's optimized leakage current. It also has an easy to install compact design. It is used in many applications, such as switched mode power supplies for telecom/data systems. SIFI-F for normal insertion lossTerminals; up to 20A ...
EPCOS B84142-Bx-R Series Power line filters for convertors ...
Description:
EPCOS B84142-Bx-R Series Power line filters for convertors and power electronics. These 2 line filters feature a high insertion loss due to its two stage construction, easy to install and has optimised leakage current. Rated voltage VR: 250 V AC/DC.Rated ...
Single phase B841113H series offer's low leakage current. ...
Description:
Single phase B841113H series offer's low leakage current. It also has an easy to install compact design. It is used in many applications, such as switched mode power supplies for telecom/data systems. SIFI-H for very high insertion lossTerminals; (case B) ...
Motor drive two stage high performance filters, suitable ...
Description:
Motor drive two stage high performance filters, suitable for a wide range of industrial motor drive applicationsCompact and flexible filtersDesigned to comply with IEC950 safety standardsConnection via screw terminals.