Seeed Studio 103030009 Relay Shield 3.0 for Arduino/Seeeduino Shield

  • RS-stocknr. 174-3234
  • Fabrikantnummer 103030009
  • Fabrikant Seeed Studio
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Seeed Studio Relay Shield 3.0

The Relay Shield provides four high-quality relays that can control high current loads to Arduino / Seeeduino boards. It also provides NO (Normally Open) / NC (Normally Closed) interface. It could be a nice solution for controlling devices that could not be directly controlled by Arduino's Digital I/Os. Standardized shield form factor enables smooth connection with Arduino and compatibles. The shield also has four LED indicators to show the on/off state of each relay.

Features and Benefits:

• Arduino/Seeeduino Shield compatible
• Relay screw terminals
• Working status indicators for each relay
• High quality relays
• Provides NO/NC interfaces

Channel1 Interface

• COM1 - Common pin
• NC1 - Normally Closed. Will be connected with COM1 when RELAY1 pin is set low and disconnected when RELAY1 is high;
• NO1 - Normally Open. Will be connected with COM1 when ŸRELAY 1 pin is set high and disconnected when RELAY1 is low;
• 4 DIGITAL PINS TO CONTROL 4 RELAYS
• RELAY1-RELAY4 pins could be connected directly with Arduino pin number of 7-4, so that four relays could be easily controlled by the Arduino

Technical Details:

• Dimensions: 68.7 x 53.5 x 30.8 mm
• Weight: G.W 77g
• Operating Voltage: 4.75V∼5.25V
• Operating Current: 8∼250 mA
• Switching Voltage: 250VAC/30VDC
• Switching Current: 15A/7A
• Frequency: 1Hz
• Switching Power: 70W
• Relay Life: 100,000 Cycle
• ESD contact discharge: ±4KV
• ESD air discharge: ±8

Specificaties
Kenmerk Waarde
Kit Classification Relay Shield 3.0
For Use With Arduino/Seeeduino Shield
Kit Name Relay Shield 3.0
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-05-2020, met een levertijd van 1 werkdag.
Prijs Each
17,86
(excl. BTW)
21,61
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 17,86
5 - 9
€ 16,89
10 - 24
€ 16,19
25 +
€ 15,87
Related Products
The ON Semiconductor MC33063DFBCKGEVB Evaluation Board features an ...
Description:
The ON Semiconductor MC33063DFBCKGEVB Evaluation Board features an MC33063MNTXG buck/boost/inverting switching regulator. The IC contains the primary functions required for DC-to-DC converters. This one layer board is in configured in step down topology with an output filter. The board measures ...
Evaluation board for the NCP160 linear regulator capable ...
Description:
Evaluation board for the NCP160 linear regulator capable of supplying 250 mA output current. Designed to meet the requirements of RF and analogue circuits, the NCP160 device provides low noise, high PSRR, low quiescent current, and very good load/line transients. ...
The STK984-090AGEVB evaluation board is designed to test ...
Description:
The STK984-090AGEVB evaluation board is designed to test the STK984-090A-E, a 3-phase BLDC motor driver Intelligent Power Module consisted of pre-driver and power MOSFET with shunt resistor and thermistor built in.
The NCP785AH120GEVB Evaluation Board supports the Ultra High ...
Description:
The NCP785AH120GEVB Evaluation Board supports the Ultra High Voltage Linear Regulator regulator NCP785A in SOT89-3 package with fix output voltage 12.0V. Ideal for high input voltage applications such as industrial and home metering, home appliances. The NCP785A family offers 5% ...