Parallax Inc 27115

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Single 10A relay module

The Single Relay module allows you to control a high-current device (up to 10A) via the on-board relay. Allows on/off control of fans, lights and other devices from a microcontroller GPIO port.

Power supply: +5Vdc @ 85mA for relay coil
Contact rating: 10A @ 250Vac/30Vdc
Communication: 3.3 to 5V logic level
Screw terminals for relay contact connections
3-pin servo-style header for power/signal interface
LED Relay-On indicator
Operating temperature range: -25 to +70°C
Dimensions: 40 x 27 x 18mm

Parallax offer an extensive range of sensor, communication and interface modules for the experimenter working on robotic systems. Most are supplied with extensive documentation making them ideal for use in education. Further information and tutorials are available from the Parallax website: http://learn.parallax.com/

Specificaties
Kenmerk Waarde
Kit Classification Module
30 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
152 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
8,27
(excl. BTW)
10,01
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 8,27
5 - 9
€ 7,67
10 +
€ 7,48
Related Products
Evaluation board for the NCP160 linear regulator capable ...
Description:
Evaluation board for the NCP160 linear regulator capable of supplying 250 mA output current. Designed to meet the requirements of RF and analogue circuits, the NCP160 device provides low noise, high PSRR, low quiescent current, and very good load/line transients. ...
The NCP4305FLY40GEVB is designed to test the NCP4305, ...
Description:
The NCP4305FLY40GEVB is designed to test the NCP4305, a synchronous rectification controller that can easily replace a secondary side rectification diode in an SMPS. The evaluation board also has an assembled LLD circuit with components with value close to typical ...
The NCP785AH120GEVB Evaluation Board supports the Ultra High ...
Description:
The NCP785AH120GEVB Evaluation Board supports the Ultra High Voltage Linear Regulator regulator NCP785A in SOT89-3 package with fix output voltage 12.0V. Ideal for high input voltage applications such as industrial and home metering, home appliances. The NCP785A family offers 5% ...
The NCP1014GTGEVB Green point(TM) reference design board has ...
Description:
The NCP1014GTGEVB Green point(TM) reference design board has been specifically designed to meet the > 0.7 power factor requirements of residential Energy Star(R) LED Luminaries without the addition of extra circuitry. This makes the driver an ideal candidate for products ...