STMicroelectronics X-NUCLEO-IHM03A1 X-Nucleo-IHM Stepper Motor Driver for STM32 Nucleo Boards

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

X-NUCLEO-IHM03A1 High-Power Stepper Motor Driver Expansion Board

The X-NUCLEO-IHM03A1 is based on powerSTEP01, a system-in-package, integrating a microstepping controller and 10A power MOSFETs in dual full-bridge configuration. The board can drive high power bipolar stepper motors in your STM32 Nucleo project. The fully digital motion control offers high levels of performance and robustness, through speed profile generation, positioning calculations, and a complete set of protection features. The X-NUCLEO-IHM03A1 is compatible with the Arduino UNO R3 connector, and supports the addition of other boards which can be stacked to drive up to three stepper motors with a single STM32 Nucleo board.

Operating voltage 7.5V to 85V
Adjustable output slew rate
Programmable speed profile
Up to 1/128 microstepping
Sensorless stall detection
Integrated voltage regulators
SPI interface
Low quiescent standby currents
Programmable non-dissipative over-current protection
Over-temperature protection

Motor Controllers & Drivers, STMicroelectronics

Specificaties
Kenmerk Waarde
Power Management Function Stepper Motor Driver
Kit Classification Expansion Board
For Use With STM32 Nucleo Boards
Kit Name X-Nucleo-IHM
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
9,59
(excl. BTW)
11,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 9,59
Related Products
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby modeThe compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP ...
ON Semiconductor Evaluation Board NCS5651MNSEVB is intended to ...
Description:
ON Semiconductor Evaluation Board NCS5651MNSEVB is intended to test the Power Line Communication (PLC) driver NCS5651. The driver is Class A/B and is a low distortion power line driver and applications include AMM/AMR metering systems, audio, valve and motor drivers. ...
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver ...
Description:
The X-NUCLEO-IHM06A1 is a low-voltage stepper motor driver expansion board based on the STSPIN220 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • ...
The 3 kW interleaved PFC evaluation kit features:power ...
Description:
The 3 kW interleaved PFC evaluation kit features:power boardcontrol boardadapter boardInput voltage range: 90 to 265 VACLine frequency range: 47 to 63 HzMaximum output power: 3 kW at 230 VOutput voltage: 400 VPower factor: > 0.98 at 20% loadTotal Harmonic ...