STMicroelectronics X-NUCLEO-IHM01A1 X-Nucleo-IHM Expansion Board for STM32 Nucleo Boards

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Stepper Motor Driver Expansion Board for STM32 Nucleo (easySPIN™ L6474)

The X-NUCLEO-IHM01A1 provides an affordable and easy-to-use solution for driving a stepper motor in any STM32 Nucleo Development Board project. The advanced current control with adaptive decay of the L6474 and a complete set of protection features (thermal, low bus voltage, overcurrent), offer high levels of both performance and robustness.

8V to 45V operating Voltage
Phase current up to 3A rms
Power OK and fault LEDs
Advanced current control
SPI interface
Fully protected power stage
Up to 1/16 microstepping resolution
Compatible with Arduino UNO R3 connector
Compatible with STM32 Nucleo boards
Suitable for multi-motor solutions

Motor Controllers & Drivers, STMicroelectronics

Specificaties
Kenmerk Waarde
Power Management Function Stepper Motor Driver
Kit Classification Evaluation Board
For Use With STM32 Nucleo Boards
Kit Name X-Nucleo-IHM
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
32 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,67
(excl. BTW)
14,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,67
Related Products
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
The STEVAL-SPIN3201 board is a three-phase Brushless DC ...
Description:
The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing. • 48MHz STM32 ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC ...
Description:
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery ...