Microchip ADM00308 Motor Driver for MTS2916A

  • RS-stocknr. 880-6834
  • Fabrikantnummer ADM00308
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MTS2916A Dual Full-Bridge Stepper Motor Driver Evaluation Board

The Microchip MTS2916A Dual Full-Bridge Stepper Motor Driver Evaluation Board is a development tool for designers to investigate the capabilities of the MTS2916A Motor Driver IC in a Stepper Motor application. In addition the board can also demonstrate the MTS62C19A Motor Driver IC, a device with the same functionality but different pin assignments. A PIC16F883 is utilised for motor control processing.

On-board are push-button switches and a variable speed input potentiometer to exercise stepper motor control in Full-Step, Half-Step, Modified Half-Step and Micro-stepping modes. Numerous easy access test points are present throughout the board.

Features

Push Button Mode with Run, Hold and Directional Control
Potentiometer Variable Speed Adjustment
LED Mode Indication
PICkit™ Programming Connector to Implement User-Created Code

Kit Contents

1 x MTS2916A Dual Full-Bridge Stepper Motor Driver Evaluation Board

Note

This kit does not include a stepper motor.

Motor Controllers & Drivers, Microchip

Specificaties
Kenmerk Waarde
Power Management Function Motor Driver
Kit Classification Evaluation Board
Featured Device MTS2916A
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
46,83
(excl. BTW)
56,66
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 46,83
Related Products
The X-NUCLEO-PLC01A1 is an input/output expansion board which ...
Description:
The X-NUCLEO-PLC01A1 is an input/output expansion board which provides an STM32 Nucleo MCU board with industrial PLC (Programmable Logic Controller) functionality. • 8 x inputs protected by a CLT01-38SQ7 digital termination array • 8 x outputs driving a VNI8200XP octal ...
The ON Semiconductor brush DC motor driver module ...
Description:
The ON Semiconductor brush DC motor driver module solution kit is an innovative solution crafted to support engineers in designing and prototyping easy and quick solutions for driving motors. It offers an API library and user-friendly graphical user interface (GUI). ...
The Pmod DHB1 uses the Texas Instruments® DRV8833 ...
Description:
The Pmod DHB1 uses the Texas Instruments® DRV8833 dual H-Bridge motor driver chip to drive two DC motors or a single stepper motor. Each H-Bridge can be driven by GPIO signals. Dual H-Bridge capable of 1.5A RMSTwo quadrature encoder channels ...
Supports up to 20V Output Pull-up Voltage–40°C to ...
Description:
Supports up to 20V Output Pull-up Voltage–40°C to 125°C Operating Temperature RangeSupports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive CoilsLow Output VOL of 0.4V (Typical) With– 140mA Current Sink per Channel at 5.0V Logic Input(1)– 1A Current ...