Rohde & Schwarz HMC8015-G Power Quality Analyser

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Rohde & Schwarz Power Quality Analyser

The Rohde & Schwarz Power analyser is the first compact tester for AC/DC load and standby current characterisation to enable measurements without extra requirements such as computers or remote infrastructure. It features a numerical and graphical display with 26 key parameters. The LXI-Core 1.4compliant power analyser can be remotely controlled via an Ethernet, USB or IEEE-488 (GPIB) interface.

Features and Benefits

Power measurement ranges between 50μW and 12kW
Analogue bandwidth ranges between DC and 100kHz
The sampling rate is 500k sample/s
Basic accuracy is 0.05%
Clear display of all the measured parameters
Measurement accuracy
26 different measurement and mathematical function

Certifications

CAN/CSA-C22.2 NO. 61010-1
certified
UL 61010-1 approved
DIN EN 61010-1
DIN EN 61326-1
DIN EN 55011
IEC 62301
EN 50564
EN 61000-3-2

Specificaties
Kenmerk Waarde
Absolute Maximum Current Measurement 20mA
Maximum Voltage 230V ac
Best Voltage Measurement Accuracy ±0.05 Reading + 0.05 Range %
Best Current Measurement Accuracy ±0.05 Reading + 0.05 Range %
Measurement Type Current, Voltage
Measurement Standards CAN/CSA-C22.2 NO. 61010-1, DIN EN 55011, DIN EN 61010-1, DIN EN 61326-1, UL 61010-1
Interface Type USB
Power Source Mains
Weight 3.3kg
Width 280mm
Maximum Frequency 100kHz
Minimum Frequency 1 kHz
Model Number p HMC8015-G
Height 88mm
Minimum Operating Temperature +5°C
Maximum Operating Temperature +40°C
Length 222mm
Dimensions 222 x 280 x 88mm
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
2.170,00
(excl. BTW)
2.625,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.170,00
Related Products
Three-phase energy and power failure analyserPower and energy ...
Description:
Three-phase energy and power failure analyserPower and energy analysis in supply networksHarmonics analysis in accordance with EN 61000-4-7Network quality in accordance with EN50160 with statistical bar chartFlicker analysis as per standard EN 61000-4-15Recording of power-on operations and errorsAnalysis module ...
The 6812C AC power source/analyser from Keysight is ...
Description:
The 6812C AC power source/analyser from Keysight is a performance AC test solution with 375 VA maximum output power and a built-in arbitrary waveform generator. 20 Vrms test signal (Option 001)High-speed measurements: 5.6 ms201 points list sweepVersatile PC connectivity (LAN, ...
The HM6050-2 line impedance stabilization network (LISN) is ...
Description:
The HM6050-2 line impedance stabilization network (LISN) is basically a filter network. Measurement of Line-conducted Interference within the Range from 9kHz…30MHz (CISPR 16)Selectable Transient LimiterArtificial Hand Connector A lowpass filter connects the DUT to the AC power lines.The LISN presents ...
The MPQ1000 handheld power quality analyzer has features ...
Description:
The MPQ1000 handheld power quality analyzer has features which make it ideal for troubleshooting, compliance testing and energy audits. Auto CT identification eliminates potential errors due to wrong CT range settings. The analyzer will automatically identify the CT and verify ...