Redundancy module for use with N+1 Redundant Systems, 1+1 Redundant Systems Screw

  • RS-stocknr. 168-2941
  • Fabrikantnummer YR20.242
  • Fabrikant PULS
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The YR20.242 is a redundancy module, which can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 24A output current and one output, which can carry nominal currents up to 24A. In addition to the YR20.242, the YR20.246 is available which is featured with an automated load sharing between the connected power supplies and functions which monitor defects in the redundancy circuit or too high output currents, which could prevent redundancy, if one power supply fails.

For N+1 and 1+1 Redundant Systems
Dual Input with Single Output
Only 60mV Voltage Drop at 10A Output Current
Only 0.6W Loss at 10A
160% (32.5A) Peak Load Capability
Reverse Input Polarity Protection
Full Power Between -40°C and +70°C
Width only 32mm
Rugged Metal Housing
Easy Wiring: Distribution Terminal for Negative Pole Included

Specificaties
Kenmerk Waarde
For Use With N+1 Redundant Systems, 1+1 Redundant Systems
Supply Voltage 8.4 → 36.4V dc
Mounting Style DIN Rail Mount
Input Current Range 0 → 20 A @ <+70 °C, 0 → 24 A @ <+45 °C
Standards Met ATEX, CE Certified, CSA Certified, CULus Listed, GL Certified, IECEx, UL 508, UL 60950-1
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
73,92
(excl. BTW)
89,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 73,92
Related Products
The ATEX approved, Quint 4 diode from Phoenix ...
Description:
The ATEX approved, Quint 4 diode from Phoenix contact is the ideal choice in the easy decoupling of power supplies as the DIN Rail diode module offers uniform redundancy.Ensuring a reliable power supply, diode modules decouple power supplies that are ...
The ATEX approved, Quint 4 diode from Phoenix ...
Description:
The ATEX approved, Quint 4 diode from Phoenix contact is the ideal choice in the easy decoupling of power supplies as the DIN Rail diode module offers uniform redundancy.Ensuring a reliable power supply, diode modules decouple power supplies that are ...
The din rail mounting, Trio Diode redundancy modules ...
Description:
The din rail mounting, Trio Diode redundancy modules from Phoenix contact are designed to isolate parallel-switched PSU’s. Using the redundancy module prevents short circuits affecting the load by checking the wiring from the power supply to the diode.Using the redundancy ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...