Buffer Module for use with UB

  • RS-stocknr. 627-6247
  • Fabrikantnummer UF20.481
  • Fabrikant PULS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Dimension U-Series, Buffer Units

Buffering with service free electrolytic capacitors
24V or 48V models available
Constant output voltage in buffer mode
Buffer time 0.2s at 20A (24V) or 0.1s at 20A (48V)
Longer hold-up time at lower levels
Buffer units can be connected in parallel to increase the output capacity or the hold-up time
Easy to install, no need for control wiring. The buffer units can be added in parallel to the load circuit at any given point
Clear status indication by status LED and signal outputs
Quick connect spring clamp terminals

Standards

UL 60950-1, UL 508, IEC 60950-1

Approvals

UL/UL Listed for Canada

Standards

IEC, UL, EN, SELV

Specificaties
Kenmerk Waarde
Accessory Type Buffer Module
For Use With UB
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-01-2020, met een levertijd van 1 werkdag.
Prijs Each
253,40
(excl. BTW)
306,61
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 253,40
Related Products
Active redundancy module for superior system availability and ...
Description:
Active redundancy module for superior system availability and maximum operational reliability. QUINT S-ORING enables the separate structuring of a redundant system. In combination with the new QUINT POWER power supply, the redundant system is monitored continuously. Consistent redundancy up to ...
Block's PowerVision is one of the most technically ...
Description:
Block's PowerVision is one of the most technically advanced and cost-effective power supply systems on the market. All modules are slim, feature communication capacities and boast maximum power reserve for optimum system availability. CompactStabilised and adjustable output voltageUp to 200% ...
The SITOP PSE200U and SITOP select selectivity modules ...
Description:
The SITOP PSE200U and SITOP select selectivity modules are the optimal expansion for all 24 V power supplies to distribute the load current to several feeders and to monitor it. Reliable shutdown in case of overload regardless of cable lengths ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...