Redundancy module for use with 20 A Power Supply

  • RS-stocknr. 733-6179
  • Fabrikantnummer YR40.241
  • Fabrikant PULS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Dimension, Decoupling Module 20A

For N+1 and 1+1 Redundant Systems
Dual Input with Single Output
Suitable for all Power Supplies
Only 72mV Voltage Drop at 20A Output Current
Only 2.15W Loss at 20A and 6.3W at 40A Output Current
160% (65A) Peak Load Capability
Reverse Input Polarity Protection
Full Power Between -40°C and +70°C
Width only 36mm
Rugged Metal Housing

Standards

UL 60950-1, UL 508, IEC 60950-1

Approvals

UL/UL Listed for Canada

Specificaties
Kenmerk Waarde
Accessory Type Redundancy Module
For Use With 20 A Power Supply
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
115,02
(excl. BTW)
139,17
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 115,02
Related Products
The Phoenix Contact QUINT ORING is a DIN ...
Description:
The Phoenix Contact QUINT ORING is a DIN rail mountable active redundancy module with ACB technology and monitoring functions. Using a redundancy module it is possible for two power supply units of the same type connected in parallel on the ...
The din rail mounting, Trio Diode redundancy modules ...
Description:
The din rail mounting, Trio Diode redundancy modules from Phoenix contact are designed to isolate parallel-switched PSU’s. Using the redundancy module prevents short circuits affecting the load by checking the wiring from the power supply to the diode.Using the redundancy ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...
Buffering with service free electrolytic capacitors24V or 48V ...
Description:
Buffering with service free electrolytic capacitors24V or 48V models availableConstant output voltage in buffer modeBuffer time 0.2s at 20A (24V) or 0.1s at 20A (48V)Longer hold-up time at lower levelsBuffer units can be connected in parallel to increase the output ...