Redundancy module for use with DIN Rail Unit

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

STEP DIODE Redundancy Module

Using the redundancy module, it is possible for two power supply units of the same type connected in parallel on the,output side to increase performance or for redundancy to be 100% isolated from one another.

Switch Mode - Phoenix Contact Single Phase and Three Phase Power Supplies

A range of power supplies, which, based on its technical properties and competitive prices, is well suited for panel builders and standard machine production, replacements of existing power supplies or comparable applications.

Specificaties
Kenmerk Waarde
Accessory Type Redundancy Module
For Use With DIN Rail Unit
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
44 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
27,47
(excl. BTW)
33,24
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 27,47
Related Products
Active redundancy module for superior system availability and ...
Description:
Active redundancy module for superior system availability and maximum operational reliability. QUINT S-ORING enables the separate structuring of a redundant system. In combination with the new QUINT POWER power supply, the redundant system is monitored continuously. Consistent redundancy up to ...
20A Enclosed Redundancy Module to improve overall l ...
Description:
20A Enclosed Redundancy Module to improve overall l system operation reliability, Support 1+1 and N+1 redundancy system, 2 channels input and 1 output, DC OK, Input 24Vdc. Support 1+1 and N+1 redundancy system2 channels inout and 1 outputSuitable for redundancy ...
Buffering with service free electrolytic capacitors24V or 48V ...
Description:
Buffering with service free electrolytic capacitors24V or 48V models availableConstant output voltage in buffer modeBuffer time 0.2s at 20A (24V) or 0.1s at 20A (48V)Longer hold-up time at lower levelsBuffer units can be connected in parallel to increase the output ...
Combining a SITOP power supply and a 90° ...
Description:
Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. ...