ROHM BD2232G-GTR Power Switch IC, High Side Switch 5-Pin, SSOP

  • RS-stocknr. 171-2055
  • Fabrikantnummer BD2232G-GTR
  • Fabrikant ROHM
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

BD2232G and BD2233G are low on-resistance N-channel MOSFET high-side power switches, optimized for Universal Serial Bus (USB) applications. BD2232G and BD2233G are equipped with the function of over-current detection, thermal shutdown, under-voltage lockout and soft-start.

Low On-Resistance (Typ. 100mΩ) N-channel MOSFET Built-in
Output Discharge Function
Over-Current Detection
Thermal Shutdown
Open-Drain Fault Flag Output
Under-Voltage Lockout
Soft-Start Circuit
Input Voltage Range: 2.7V to 5.5V
Control Input Logic Active-High (BD2232G), Active-Low (BD2233G)
Applications:
PLC (Programmable Logic Controller)
Motor Control: Brushless DC
AC Servo
Blood Pressure Monitor
DVR/DVS
Motor Control: Stepper Motor
Motor Control: Brushed DC
Data Management Apparatus for Remote Healthcare
Embedded PC
MFP(Multi Function Printer)
Car Navigation
PND (Portable Navigation Device)
Digital Still Camera
Ultrasound System for Portable
Ultrasound System
Digital Video Camera
Solar Power Inverters

Specificaties
Kenmerk Waarde
Power Switch Type High Side Switch
Power Switch Topology High Side
Switch On Resistance 145mΩ
Number of Channels 1
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Current 160µA
Mounting Type Surface Mount
Package Type SSOP
Pin Count 5
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Dimensions 2.9 x 1.6 x 1.1mm
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (On a Reel of 3000)
0,259
(excl. BTW)
0,313
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 +
€ 0,259
€ 777,00
*prijsindicatie
Related Products
Compact low-cost switch ICs which can be used ...
Description:
Compact low-cost switch ICs which can be used to eliminate losses in resistive signal paths connected between high-voltage rails and switching power supply controllers. Typical applications include the feed-forward or feedback signal paths in PFC systems and power converters. The ...
60 V, 1.5 A PNP BISS loadswitch, PNP ...
Description:
60 V, 1.5 A PNP BISS loadswitch, PNP low VCEsat Breakthrough In Small Signal (BISS) transistor and NPN Resistor- Equipped Transistor (RET) in a SOT457 (SC-74) small Surface-Mounted Device (SMD) plastic package. Low VCEsat (BISS) and resistor-equipped transistor in one ...
The ADP1290 is a high-side load switch designed ...
Description:
The ADP1290 is a high-side load switch designed for operation between 2.3 V and 13.2 V. This load switch provides power domain isolation, helping to extend battery operation. The device contains a low on-resistance, N-channel MOSFET that supports more than ...
The MAX14001/MAX14002 are isolated, single-channel analog-to-digital converters (ADCs) ...
Description:
The MAX14001/MAX14002 are isolated, single-channel analog-to-digital converters (ADCs) with programmable voltage comparators and inrush current control optimized for configurable binary input applications. 3.75kVRMS of integrated isolation is provided between the binary input side (field-side) and the comparator ...