ROHM BD2241G-GTR Power Switch IC, High Side Switch 5-Pin, SSOP

  • RS-stocknr. 171-2056
  • Fabrikantnummer BD2241G-GTR
  • Fabrikant ROHM
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

BD2240G and BD2241G are low on-resistance N-channel MOSFET high-side power switches, optimized for Universal Serial Bus (USB) applications. BD2232G and BD2233G are equipped with the function of over-current detection, thermal shutdown, under-voltage lockout and soft-start.

Low On-Resistance (Typ. 100mΩ) N-channel MOSFET Built-inOutput Discharge FunctionOver-Current DetectionThermal ShutdownOpen-Drain Fault Flag OutputUnder-Voltage LockoutSoft-Start CircuitInput Voltage Range: 2.7V to 5.5VControl Input Logic Active-High (BD2240G), Active-Low (BD2241G)Applications:PLC (Programmable Logic Controller)Motor Control: Brushless DCAC ServoBlood Pressure MonitorDVR/DVSMotor Control: Stepper MotorMotor Control: Brushed DCData Management Apparatus for Remote HealthcareEmbedded PCMFP(Multi Function Printer)Car NavigationPND (Portable Navigation Device)Digital Still CameraUltrasound System for PortableUltrasound SystemDigital Video CameraSolar Power Inverters

Specificaties
Kenmerk Waarde
Power Switch Type High Side Switch
Power Switch Topology High Side
Switch On Resistance 155mΩ
Number of Channels 1
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Current 160µA
Mounting Type Surface Mount
Package Type SSOP
Pin Count 5
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Dimensions 2.9 x 1.6 x 1.1mm
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (On a Reel of 3000)
0,399
(excl. BTW)
0,483
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 +
€ 0,399
€ 1.197,00
*prijsindicatie
Related Products
Power Integrations range of CAPZero™ Integrated Circuits (ICs) ...
Description:
Power Integrations range of CAPZero™ Integrated Circuits (ICs) are intelligent high voltage switches designed to reduce power losses in switching supplies that are linked with the X capacitor discharge resistors. The CAPZero Capacitor Discharge IC will allow designs to meet ...
Intelligent Power Switches (IPS) integrate the logic interface, ...
Description:
Intelligent Power Switches (IPS) integrate the logic interface, drivers, diagnostic and protection features of a control section and the power stage for high-side configurations.
The OMNIFET series of fully auto-protected low-side drivers, ...
Description:
The OMNIFET series of fully auto-protected low-side drivers, are measured on the criteria of ruggedness and improved reliability. These solid state power switches are designed for inductive or resistive loads, especially in the automotive environment. Linear current limitationThermal shut downShort ...
Compact low-cost switch ICs which can be used ...
Description:
Compact low-cost switch ICs which can be used to eliminate losses in resistive signal paths connected between high-voltage rails and switching power supply controllers. Typical applications include the feed-forward or feedback signal paths in PFC systems and power converters. The ...