JST 01SPHSPH-26L-150 Test Lead Wire

  • RS-stocknr. 166-7248
  • Fabrikantnummer 01SPHSPH-26L-150
  • Fabrikant JST
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

JST PH Series Crimp Contacts and Cable Assemblies

The PH series of crimp receptacle contacts and cable assemblies from JST are great for use in the PH series crimp connector housings in a range of applications. The crimp receptacle contacts are made from phosphor bronze with a tin plating and accept a wire size range of 30 to 24 AWG for a strong and reliable connection.

PH Series Crimp Contacts
123-5948 Female 30AWG to 24AWG – Standard Tape
820-1456 Female 30AWG to 24AWG – Standard Pack
166-7395 Female 30AWG to 24AWG – Bulk Bag

PH Series Crimp Contact Leads
820-1419 Double ended 150mm crimp contact wire – Standard Pack
166-7248 Double ended 150mm crimp contact wire – Bulk Bag
820-1412 Double ended 300mm crimp contact wire – Standard Pack
166-7247 Double ended 300mm crimp contact wire – Bulk Bag

Note

The 'B' in the manufacturers part number BPH-002T-P0.5S shows that the product is a loose piece cut from a reel with manufacturers part number SPH-002T-P0.5S.

2.0mm Wire-to-Board Connector, JST PH Series

1000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Bag of 1000)
0,367
(excl. BTW)
0,444
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
1000 +
€ 0,367
€ 367,00
*prijsindicatie
Related Products
Type 44® wire & cable has widespread uses ...
Description:
Type 44® wire & cable has widespread uses where environmental conditions demand consistently reliable performance. This mechanically tough wire & cable is easy to handle and install. Dual wall construction Small size, lightweight Low smoke and corrosive gas generation Resistant ...
From RS PRO, This ethylene tetrafluoroethylene (also known ...
Description:
From RS PRO, This ethylene tetrafluoroethylene (also known as Tefzel) insulated wire is manufactured to meet the requirements of defence standard 61-12 Part29/1. Its outer sheath resists temperatures up to +270 °C and has good chemical and abrasion resistance. The ...
The Molex KK Interconnect System features a range ...
Description:
The Molex KK Interconnect System features a range of flexible components designed for power and signal applications. The KK 254 connectors are used in board-to-board and wire-to-board connections. They have a 4A current rating, a pitch of 2.54mm, and is ...
The KY30 series wire can be used in ...
Description:
The KY30 series wire can be used in the electronics and electrical engineering industries for small and medium appliance wiring. Flame RetardantCopper strand tinned conductor materialFlexible multi-wire conductor classPVC Core insulation.