S3/6243G 15x1/2 Press MI Coupling

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: HU
Productomschrijving

Pegler Yorkshire Coupling

The Pegler Yorkshire 28mm copper S1 MI straight male connector coupling is used with hard and half-hard copper tubes. It has a press-fit x BSP taper male thread connection type.

Features and Benefits

• Ambient temperature ranges between 15°C and 95°C
• Clean, rapid and heat-free jointing. No complicated clamping techniques, long preparation procedures or waiting for adhesive to dry
• Electrical continuity assured when jointing process is complete
• Leak before press feature
• Major savings in installation time and cost as compared to traditional jointing methods
• No carbon deposits, internal solder runs or flux residue. Reduced risk of corrosion
• No hot works required
• Operating pressure is 16bar
• Perfectly clean internal bore-less finishing or cleaning required
• Reduced flushing requirement
• Safe as no naked flames
• System does not need to be dry for effective jointing

Applications

• Domestic maintenance, refurbishment and new build
• Large-scale public sector projects

Certifications

• BS 8537:2010
• EN 1787
• WRAS approval
• DVGW approval

Specificaties
Kenmerk Waarde
Fitting Type Coupler
Gender Male
Material Copper
70 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
Was € 7,71
7,258
(excl. BTW)
8,782
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
€ 7,258
€ 72,58
*prijsindicatie
Related Products
Pressing the push-button once decompresses the lower part ...
Description:
Pressing the push-button once decompresses the lower part of the coupling, without disconnecting the nipple, reducing the risk of ’hose-whip’ to the user. Pressing the push-button a second time safely releases the nipple. Two stage self-venting releaseConforms to ISO 4414:1998 ...
Leak Before Press featureNo hot works requiredReduced flushing ...
Description:
Leak Before Press featureNo hot works requiredReduced flushing requirement.
The Pegler Yorkshire 22mm copper S1 straight coupling ...
Description:
The Pegler Yorkshire 22mm copper S1 straight coupling is used with hard and half-hard copper tubes. This product is suitable for joining copper. It has a press-fit connection type. • Ambient temperature ranges between 15°C and 95°C• Clean, rapid and ...
The Pegler Yorkshire 15mm 90MF copper S12S street ...
Description:
The Pegler Yorkshire 15mm 90MF copper S12S street elbow is used with hard and half-hard copper tubes. It has a press-fit x male end for insertion into fitting connection type. • Ambient temperature ranges between 15°C and 95°C• Clean, rapid ...