RS Components
Onze website gebruikt cookies en soortgelijke technologieën om u nog beter van dienst te zijn bij het zoeken of het plaatsen van een bestelling, voor analytische doeleinden en om advertenties te personaliseren.
 
Fabrikantnummer

Reliance 10bar Temperature and Pressure Relief Valve with Male BSP 1/2 in BSP Male Connection


10 op voorraad - levertijd is 1 werkdag(en).
Add to Basket

Prijs Each

€ 56,89

(excl. BTW)

€ 68,84

(incl. BTW)

Aantal stuks

Toegevoegd

RS-stocknr.:
794-8423
Fabrikantnummer:
PTEM550753
Fabrikant:
Reliance Water Controls

N.v.t.

Land van herkomst:
US
Aantal stuksPer stuk
1 +€ 56,89

Full Cartridge Pressure and Temperature Relief Valve


All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.

Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.

The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used


Protect against temperature rising above 95゚C
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts


Note

(7948432 no PTFE), (7948439, 7948448 and 7948457 with probe)

Approvals

WRAS

KenmerkWaarde
Connection1/2 in BSP Male
Maximum Set Pressure10bar
Maximum Temperature+95°C
For Use WithHot Water
Connection GenderMale
Thread Size1/4in
Thread Standard or Connection TypeBSP