Reliance 7bar Temperature and Pressure Relief Valve with Male 15 mm Compression Connection

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

Full Cartridge Pressure and Temperature Relief Valve

All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.

Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.

The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used

Protect against temperature rising above 95゚C
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts

Note

(7948432 no PTFE), (7948439, 7948448 and 7948457 with probe)

Approvals

WRAS

Specificaties
Kenmerk Waarde
Connection 15 mm Compression
Maximum Set Pressure 7bar
Maximum Temperature +95°C
For Use With Hot Water
Connection Gender Male
Thread Size 15in
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
68,64
(excl. BTW)
83,05
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 68,64
Related Products
RS PRO S.28 quarter-turn manual ball valves feature ...
Description:
RS PRO S.28 quarter-turn manual ball valves feature a dual sealing system that allows the valve to be operated in either direction making installation easier. With no metal-to-metal moving parts and a chrome plated ball, the RS PRO manual valves ...
Chromium plated brass, all components WRC listedPressure rating ...
Description:
Chromium plated brass, all components WRC listedPressure rating 16 bar at 30°C, 10 bar at 65°C, 6 bar at 110°C (test 20 bar)Straight and tee pattern quarter turn isolating valves for use on hot and cold water systemsFlow rate 0.16 ...
Hot pressed, nickel plated brass full bore ball ...
Description:
Hot pressed, nickel plated brass full bore ball valves with Lever style operating handles.,Suitable for oil, air, water, saturated steam or high temperature hot water services in domestic, commercial and industrial applications. Time efficient, no nonsense one step joint processSuitable ...
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. Time efficient, no nonsense one ...