Honeywell Absolute for Various Media Pressure Sensor, 100psi Max Pressure Reading , 4.75 → 5.25 V dc, NPT 1/8,

  • RS-stocknr. 111-5920
  • Fabrikantnummer PX3AN2BS100PAAAX
  • Fabrikant Honeywell
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Honeywell PX3 Series Pressure Transducer

Honeywell PX3 Series heavy duty pressure transducer is a range of highly configurable pressure sensors that use piezoresistive sensing technology with ASIC (Application Specific Integrated Circuit) signal conditioning in a brass housing. The PX3 Series is fully calibrated and compensated for offset, sensitivity, temperature effects and non-linearity using the on-board ASIC.

Pressure range: 1 bar to 46 bar (absolute and sealed gage)
Fully calibrated and temperature compensated
Total Error Band: ±1.0 %FSS from -20 °C to 85 °C [-4 °F to 185 °F]
Insulation resistance: >100 MOhm, 1500 V dc
Dielectric strength: AC1500V, 1 min. or AC1800, 1 s
Current consumption: 3.5 mA max.
Ingress protection up to IP67
Response time: <2 ms
RoHS, REACH, and CE compliant

Specificaties
Kenmerk Waarde
Pressure Reading Type Absolute
Minimum Pressure Reading 0psi
Maximum Pressure Reading 100psi
Accuracy ±0.25 %
Output Type Analogue
Media Measured Air, Brake Fluid, Hydraulic Fluid, Oil, Refrigeration Fluid
Process Connection NPT 1/8
Analogue Output 0.5 → 4.5 V
Electrical Connection Metri-Pack 150
Response Time <2 ms
Maximum Current 3 mA
Supply Voltage 4.75 → 5.25 V dc
Housing Material Brass
IP Rating IP67
Maximum Operating Temperature +125°C
Mounting Type Threaded
Minimum Operating Temperature -40°C
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
60 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
40,18
(excl. BTW)
48,62
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 40,18
Related Products
Sensirion’s SDP1000/SDP2000 series of low range differential pressure ...
Description:
Sensirion’s SDP1000/SDP2000 series of low range differential pressure sensors for air and other non-aggressive gases provide fast and reliable measurement with excellent stability. The small and cost-effective design makes them an ideal match for price-sensitive solutions, e.g. in medical and ...
The IPSU-M12 series is suitable for use in ...
Description:
The IPSU-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting ...
The 142PC series pressure sensors are piezo-resistive devices ...
Description:
The 142PC series pressure sensors are piezo-resistive devices with semiconductors, which are perfectly suited to exact pressure measurements.A silicon membrane generates a linear output signal proportional to the pressure, with no ripple.The advanced technology of these sensors gives them great ...
Amplified pressure gauge sensorSmall 6-pin DIL package requires ...
Description:
Amplified pressure gauge sensorSmall 6-pin DIL package requires minimal PCB spaceFully signal conditioned monolithic designSilicon piezo-resistive measurement technologyPort designed for O-ring interfaceExcellent media compatibilityAccuracy of 0.2%Media: Air, dry gasesOperating temp. -45°C → +125°C.