Sensirion Differential for Air, Non-Aggressive Gas Pressure Sensor, 62Pa Max Pressure Reading , 4.75 → 5.25 V,

  • RS-stocknr. 173-2222
  • Fabrikantnummer SDP1000-L025
  • Fabrikant Sensirion
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

SDP1000/SDP2000 Low Range Differential Pressure Sensors

Sensirion’s SDP1000/SDP2000 series of low range differential pressure sensors for air and other non-aggressive gases provide fast and reliable measurement with excellent stability. The small and cost-effective design makes them an ideal match for price-sensitive solutions, e.g. in medical and HVAC applications. Each differential pressure sensor is individually calibrated and temperature compensated.

Low Differential Pressure Sensors with fast response time

The SDP1108 and SDP2208 devices (123-7134 and 123-7135) feature a reduced response time of 8ms optimised for medical ventilation applications.

5V dc supply operation
0.25 to 4.0V analogue output
Zero offset and excellent long term stability
Insensitive to the mounting orientation

Pressure Sensors, Sensirion

Specificaties
Kenmerk Waarde
Pressure Reading Type Differential
Minimum Pressure Reading -62Pa
Maximum Pressure Reading 62Pa
Accuracy 0.6 %, 2 %
Output Type Analogue
Media Measured Air, Non-Aggressive Gas
Analogue Output 0.2 → 4 V
Electrical Connection 3 Pin SMD Connector
Response Time 40 ms
Maximum Current 5.2 mA
Supply Voltage 4.75 → 5.25 V
Housing Material PPS
IP Rating IP20
Maximum Operating Temperature +60°C
Minimum Operating Temperature -10°C
Series SDP1000
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 25)
71,487
(excl. BTW)
86,499
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
25 +
€ 71,487
€ 1.787,175
*prijsindicatie
Related Products
Vacuum: 150mm (6in)WG to 670mbar (9.8psi)Factory preset to ...
Description:
Vacuum: 150mm (6in)WG to 670mbar (9.8psi)Factory preset to 9in WG pressure. External screw adjustmentCan be used to detect pressure differentials across a bulkhead. GF Polyester housing, silicone rubber diaphragm, silver plated contacts Body thread size: 14 x 1.4mm Pin diameter ...
GT27028 differential pressure switch Pressure range: 1.00” to ...
Description:
GT27028 differential pressure switch Pressure range: 1.00” to 5.00” H20 Single pole change over contacts Diaphragm material: Post cured Silicone Burst pressure: 1 PSI Operating Temperature: -25°C to +105°C Electrical rating: 5A 250V AC Vertical mount recommended.
The 142PC series pressure sensors are piezo-resistive devices ...
Description:
The 142PC series pressure sensors are piezo-resistive devices with semiconductors, which are perfectly suited to exact pressure measurements.A silicon membrane generates a linear output signal proportional to the pressure, with no ripple.The advanced technology of these sensors gives them great ...
These miniature Surface Mount Technology (SMT) Low Pressure ...
Description:
These miniature Surface Mount Technology (SMT) Low Pressure Sensors are small, cost effective devices intended for use with wet/wet differential sensing. Based on the long established reliability and accuracy of the single in-line package, the SMT version’s smaller configuration reduces ...