RS PRO Pressure Sensor, 5800psi Max Pressure Reading Analogue

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

The IPSU-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially for industrial applications... Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration data*. Mating cable and plug assemblies are available.

Piezo-resistive thick film ceramic sensor
Stainless steel body
Accuracy <±0.25% FS BFSL
0-5V or 4-20mA outputs
Pressure ranges from -1 to 400 bar
M12 4-pin connector

Specificaties
Kenmerk Waarde
Pressure Reading Type Relative
Minimum Pressure Reading 0psi
Maximum Pressure Reading 5800psi
Accuracy ±0.25 %
Output Type Analogue
Process Connection NPT 1/4
Analogue Output 4 → 20 mA
Electrical Connection M12 Connector
Maximum Current 20 mA
Supply Voltage 9 → 32 V dc
Housing Material Stainless Steel
IP Rating IP67
Minimum Operating Temperature -20°C
Series IPSU
Mounting Type Threaded
Maximum Operating Temperature +80°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 16-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
148,42
(excl. BTW)
179,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 148,42
Related Products
RS Pro IWPT series wireless pressure transducer is ...
Description:
RS Pro IWPT series wireless pressure transducer is an effective replacement to a traditionally wired pressure transducer in inaccessible and expensive installation environments. It is easily paired to the compatible RS Pro IWR family of wireless receivers, thus offering a ...
RS Pro IWR series wireless receiver designed to ...
Description:
RS Pro IWR series wireless receiver designed to pair with the IWPT series of wireless pressure transducers. This pairing offers an effective solution for inaccessible installation environments.The receiver has a user selectable voltage or mA output corresponding to the calibrated ...
These miniature Surface Mount Technology (SMT) Low Pressure ...
Description:
These miniature Surface Mount Technology (SMT) Low Pressure Sensors are small, cost effective devices intended for use with wet/wet differential sensing. Based on the long established reliability and accuracy of the single in-line package, the SMT version’s smaller configuration reduces ...
The RS PRO IPS-M12 series low range pressure ...
Description:
The RS PRO IPS-M12 series low range pressure sensor has a housing made from 316L stainless steel with viton O-ring seals. It uses a piezo-electric silicon sensor. The nominal pressure output of this sensor ranges from 50mbar to 1000bar. It ...