RS PRO Gas, Liquid Relative Pressure Switch, Analogue 0 → 4bar, 10 → 30 V dc, G1/4 process connection

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

401001 series pressure converters

Range of piezo-resistive pressure converters for measuring relative pressures in gaseous and liquid environments.
Output 4 → 20 mA.
AISI 303 stainless steel housing.
The part in contact with the environment to be measured is made from AISI 303 stainless steel.
2 wire output via cable gland and screw terminal or M12 connector (43008 series)
Linear characteristics.

Specificaties
Kenmerk Waarde
Pressure Range 0 → 4bar
Pressure Reading Type Relative
Media Measured Gas, Liquid
Output Type Analogue
Supply Voltage 10 → 30 V dc
Minimum Pressure Reading 0bar
Process Connection G1/4
Maximum Pressure Reading 4bar
Electrical Connection M12 Connector
Analogue Output 4 → 20 mA
Minimum Operating Temperature +20°C
Maximum Operating Temperature +125°C
Accuracy ≤0.5 %
Response Time ≤3 ms
Housing Material Stainless Steel
IP Rating IP65
Mounting Type Not Front-Flush
10 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
120,54
(excl. BTW)
145,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 120,54
5 - 9
€ 116,93
10 +
€ 112,11
Related Products
The Cynergy3 LFS series paddle flow switch has ...
Description:
The Cynergy3 LFS series paddle flow switch has a flow rate of 15.2L/min to 60.6L/min and 19L/min and 83.3L/min. This switch is mounted vertically through a socket or upstand process connection. The user can make electrical connections within the housing ...
The Telemecanique Sensors XY2-CH-series emergency stop rope pull ...
Description:
The Telemecanique Sensors XY2-CH-series emergency stop rope pull switch has a 1NO/2NC contact configuration. It has Zamak housing and has a straight mount orientation. The maximum AC and DC voltage is 240VAC and 250VDC respectively and the current rating of ...
Maximum system length: 75 mSwitch function: 2 NC ...
Description:
Maximum system length: 75 mSwitch function: 2 NC + 2 NO (standard)Built-in reset buttonCable pull eyelet, low costVisualisation of correct cable tensionMeets EN418 and IEC947-5-5Protection class IP67.
Designed to meet the latest standard for emergency ...
Description:
Designed to meet the latest standard for emergency stop equipment, EN418 and is suitable for Zone 1 & 2 environmentsCan be installed along or around awkward machinery such as conveyors and provides a constant access emergency stop facilityStatus indicator makes ...