RS Components
Onze website gebruikt cookies en soortgelijke technologieën om u nog beter van dienst te zijn bij het zoeken of het plaatsen van een bestelling, voor analytische doeleinden en om advertenties te personaliseren.
 
Fabrikantnummer

RS PRO Process Ball Valve 1in

Afbeelding representeert productcategorie


21 op voorraad - levertijd is 2 werkdag(en).
Add to Basket

Prijs Each

€ 22,91

(excl. BTW)

€ 27,72

(incl. BTW)

Aantal stuks

Toegevoegd

RS-stocknr.:
812-5154
Fabrikant:
RS PRO
Land van herkomst:
IT
Aantal stuksPer stuk
1 - 4€ 22,91
5 - 9€ 22,22
10 +€ 21,51

S.81 Side Drain Brass Ball Valve - 1/4 Turn


Application : Plumbing, Water
Drain the downstream or the whole line
Apply thermal or flow sensors
Apply pressure gauges
Divert the fluid to a new stream
Operating Temperature : -20゚C (-4゚F) / +170゚C (+350゚F)
Operating pressure : PN16 (230 PSI) up to 2’’, non-shock cold working pressure
Threads : ISO228 parallel female by female threads
Port : Full
Connections options : FxF
Stem Configuration : Blowout-proof nickel plated brass stem, with two FPM O-rings at the stem for maximum safety
Ball seats : Pure PTFE self-lubricating, with flexible-lip design
Body : Full port to DIN 3357 for maximum flow
100% Made in Italy
Chrome plated brass ball for longer life
Silicone-free lubricant on all seals
Travel stops on body to avoid stress at stem
24h 100% seal test guaranteed
Dual sealing system allows valve to be operated in either direction making installation easier
No metal-to-metal moving parts
No maintenance ever required
Handle clearly shows ball position
Quality : Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite or equivalent thread sealant; Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications


Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite or equivalent thread sealant
Finest brass according to EN 12165 and EN 12164 (formerly
DIN 17660 and UNI 5705-65) specifications
Double side drain allows easy and safe downstream line venting


Working Pressure:


16 Bar Kg/cm2 (230 PSI)
non-shock cold working pressure
Applicable to valve, not to side tap


Flow:


Full port to DIN 3357 for maximum flow


Thread:


ISO 228 parallel female by female threads
G 1/4in. ISO 228 drain on both side


Seals:


Pure PTFE self-lubricating seats with flexible-lip design


Note

Approvals apply to specific configurations only

Approvals

GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant

Warning

Freezing of the fluid in the installation may severely damage the valve

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

KenmerkWaarde
Attachment TypeThreaded
Threaded Connection1 in BSP
Maximum Working Pressure16 bar
Body MaterialNickel Plated Brass
Ball MaterialChrome Plated Brass
Actuator IncludedYes
Seal MaterialPTFE
Thread Size1in
Thread StandardBSP