Parker Process Check Valve M6A-C4L-25-SS

  • RS-stocknr. 432-5117
  • Fabrikantnummer M6A-C4L-25-SS
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

’C’ Series Check Valve

Designed for uni-directional flow control of fluids and gases in process and instrumentation applications
Pressure rating: 6000 psig (414 bar)
Body material: ASTM A276 Type 316
Spring material: 316 stainless steel
Operating temperature range: –26 to +204°C
Blow-out resistant seat design
Back-stopped poppet minimizes spring stress
Crack pressure: 25 psig (1.75 bar)
Reseal pressure: 4 psig (0.28 bar) less than cracking pressure
Factory tested for crack and reseat
Fluorocarbon elastomer seat/seal

Note

Check valves that have not been actuated for some time may initially crack at higher than the quoted crack pressure.

//media.rs-online.com/t_line/L432507-01.gif
//media.rs-online.com/t_line/L432507-02.gif

Stainless Steel Valves and Filters

The Parker Hannifin range of stainless steel Instrumentation tubing, tube fittings, valves, regulators and manifolds are manufactured to meet the demand for precision-engineered instrumentation components of the highest quality. All products meet or exceed the relevant worldwide standards.,A range of high quality valves for analytical, chemical, oil and gas, power, pulp and paper applications.

Specificaties
Kenmerk Waarde
Connection 6 mm Compression
Body Material Stainless Steel
Maximum Working Pressure 414 bar
Flow Factor Kv 0.64m³/h
Thread Size 6mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
44,91
(excl. BTW)
54,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 44,91
5 - 9
€ 43,54
10 +
€ 42,13
Related Products
Permits flow in one direction onlyBody and shut-off ...
Description:
Permits flow in one direction onlyBody and shut-off valve in stainless steel 316LSpring in stainless steel 302’O’-rings fluorelastomer FKM (FPM)Maximum working pressure 40 barTemperature range -20°C to +180°C.
RS Pro Brand Screwed End Swing Check Valves ...
Description:
RS Pro Brand Screwed End Swing Check Valves that allow liquids to flow in only one direction. 1/2 - 3" (DN15 - DN80)W.P: 200 WOGW.T: -20°C - 200°C (-4°F - 392°F)Investment castingSocket weld (option)Thread type: ASME B1.20.1 (NPT), DIN 2999 ...
A compact stainless steel non return disc check ...
Description:
A compact stainless steel non return disc check valve designed for use with steam and hot condensate. These valves have a CE marking of PN25. Connections are female screwedLow pressure dropSimple and compact designHorizontal or vertical installation.
Single check valve protects against the risk of ...
Description:
Single check valve protects against the risk of back flow and back syphonage contaminationsCompact lightweight construction for easy installationMinimum pressure drop giving good flow ratesIdeal for all Class 2 contamination risks as per Water Supply (water fittings) Regulations 1999Available with ...