Burkert Stainless Steel In-line Flow Sensor Fitting 1/2in Straight Flow Sensor 1/2BSP

  • RS-stocknr. 467-945
  • Fabrikantnummer 438199
  • Fabrikant Burkert
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Compact Magnetic Paddle Flow Switch – 8010 series

Compact switches with moving magnet reed contacts specifically designed for monitoring maximum/minimum flow values. The switches fit a range of connection bodies

Suitable for neutral fluids, oils, water up to +50°C as well as acidic and alkaline solutions
Mechanical adjustment of set-point
On/Off control system for monitoring and switching
No contact between process fluids and switch
IP65 rated with three-pin DIN connector
FPM seal material

Specificaties
Kenmerk Waarde
Fitting Direction Straight
Fitting Type Flow Sensor
Connection 1/2 in G
Series 8010
Material Stainless Steel
Maximum Working Pressure 16 bar
Connection Size 1/2in
Thread Standard or Connection Type G
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-09-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
275,55
(excl. BTW)
333,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 275,55
Related Products
Solid state flow sensor, no moving partsDisplays flow ...
Description:
Solid state flow sensor, no moving partsDisplays flow and volumeMulti-language, menu driven operationSimulation option provides all output signals for commissioningTeach-in, automatic calibration for specific applicationsOutputs: 4 to 20mA, calibrated pulse and two relaysDisplay and function keys protected by ...
CEJN's non drip couplings are designed for low-pressure ...
Description:
CEJN's non drip couplings are designed for low-pressure fluid and vacuum applications, and their performance and safety requirements. The product range is ideal for connecting all types of fluid lines. All have a single disconnect stage. Nickel-plated brass body, NBR ...
This Georg Fischer coupler is ideally used for ...
Description:
This Georg Fischer coupler is ideally used for industrial pressure applications such as water and gas. The coupler provides an extensive combination of possibilities and with an ease of assembly. 4 mm pin connectors ensure a secure fit between all ...
This Georg Fischer end cap kit is ideally ...
Description:
This Georg Fischer end cap kit is ideally used for industrial pressure applications such as water and gas. 4 mm pin connectors ensure a secure fit between all ends of the pipe. The end cap is supplied with the ELGEF+ ...