CEJN Brass Process Fitting 1/2in Straight Coupler 1/2BSP

  • RS-stocknr. 498-678
  • Fabrikantnummer 105671200
  • Fabrikant CEJN
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: SE
Productomschrijving

CEJN Non-Drip Connectors

CEJN's non drip couplings are designed for low-pressure fluid and vacuum applications, and their performance and safety requirements. The product range is ideal for connecting all types of fluid lines. All have a single disconnect stage. Nickel-plated brass body, NBR (Nitrile rubber) seal, stainless steel spring.

Non-drip, no air inlet when connecting or spillage when disconnecting (double shut-off version)
Double shut-off
High Flow Capacity

Non-Drip Connectors

Specificaties
Kenmerk Waarde
Fitting Direction Straight
Fitting Type Coupler
Connection 1/2 in G
Series 567
Material Brass
Maximum Working Pressure 20 bar
Length 52.5mm
Connection Size 1/2in
Thread Standard or Connection Type G
21 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
58,13
(excl. BTW)
70,34
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 58,13
Related Products
The SharkBite Push-Fit Solution is a quick and ...
Description:
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints.
The S030 fitting has a built-in paddlewheel to ...
Description:
The S030 fitting has a built-in paddlewheel to measure the flow rate. When liquid flows through the pipe, the paddle-wheel is set in rotation producing pulses which are proportional to the flow rate. Closed pipe system (sensor inside fitting)Sensor unit ...
In-line flow adaptors incorporating paddle wheel transducer which ...
Description:
In-line flow adaptors incorporating paddle wheel transducer which is set in rotation when liquid flows through the pipe. G-port connection (internal thread)PVDF paddle wheel and ceramic axis and bearingMeasuring range from 0.3 m/s (AF> 1//2 inch pipe, 0.3 fps flow ...
Compact switches with moving magnet reed contacts specifically ...
Description:
Compact switches with moving magnet reed contacts specifically designed for monitoring maximum/minimum flow values. The switches fit a range of connection bodies. Suitable for neutral fluids, oils, water up to +50°C as well as acidic and alkaline solutionsMechanical adjustment of ...