Georg Fischer Electro fusion Fitting 25mm Straight End Cap

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CH
Productomschrijving

ELGEF+ End Cap

This Georg Fischer end cap is ideally used for industrial pressure applications such as water and gas. 4 mm pin connectors ensure a secure fit between all ends of the pipe.

Features and Benefits

Integral pipe fixation
Max pressure – 10 bar Gas / 16 bar Water
Limited path fusion indicators

George Fischer Electrofusion Fittings

Georg Fischer ELGEF+ is the electrofusion system for pressurised piping systems. Each part has been developed to work with all other system components. Whether for water, gas or other pressurised piping, above or below ground. Enables a quick and reliable connection of your pipes and spigot through electrofusion.

Specificaties
Kenmerk Waarde
Fitting Direction Straight
Fitting Type End Cap
Series ELGEF Plus
Maximum Working Pressure 10 (Gas) bar, 16 (Water) bar
Length 52mm
Connection Size 25mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
8,49
(excl. BTW)
10,27
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 8,49
Related Products
The S030 fitting has a built-in paddlewheel to ...
Description:
The S030 fitting has a built-in paddlewheel to measure the flow rate. When liquid flows through the pipe, the paddle-wheel is set in rotation producing pulses which are proportional to the flow rate. Closed pipe system (sensor inside fitting)Sensor unit ...
CEJN's non drip couplings are designed for low-pressure ...
Description:
CEJN's non drip couplings are designed for low-pressure fluid and vacuum applications, and their performance and safety requirements. The product range is ideal for connecting all types of fluid lines. All have a single disconnect stage. Nickel-plated brass body, NBR ...
CEJN's non drip couplings are designed for low-pressure ...
Description:
CEJN's non drip couplings are designed for low-pressure fluid and vacuum applications, and their performance and safety requirements. The product range is ideal for connecting all types of fluid lines. All have a single disconnect stage. Nickel-plated brass body, NBR ...
This Georg Fischer 90° elbow is ideally used ...
Description:
This Georg Fischer 90° elbow is ideally used for industrial pressure applications such as water and gas. The elbow provides an extensive combination of possibilities and with an ease of assembly. 4 mm pin connectors ensure a secure fit between ...