Parker Needle Valve 4A-V4LR-SS, 1/4 in

  • RS-stocknr. 432-5195
  • Fabrikantnummer 4A-V4LR-SS
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

’V’ Series Needle Valve

Designed for positive leak-tight shut-off and regulation in process, power and instrumentation applications
Pressure rating 5000 psig (345 bar)
Body material ASTM A182 Type F316
Operating temperature range -54 to +232°C
Blunt stem tip (30 degrees) for isolation and coarse flow control
PTFE stem seal material

//media.rs-online.com/t_line/L432507-01.gif
//media.rs-online.com/t_line/L432519-01.gif
//media.rs-online.com/t_line/L432519-02.gif
//media.rs-online.com/t_line/L432519-03.gif
//media.rs-online.com/t_line/L432519-04.gif
//media.rs-online.com/t_line/L432519-05.gif

Stainless Steel Valves and Filters

The Parker Hannifin range of stainless steel Instrumentation tubing, tube fittings, valves, regulators and manifolds are manufactured to meet the demand for precision-engineered instrumentation components of the highest quality. All products meet or exceed the relevant worldwide standards.,A range of high quality valves for analytical, chemical, oil and gas, power, pulp and paper applications.

Specificaties
Kenmerk Waarde
Valve Orientation Inline
Connection 1/4 in
Body Material Stainless Steel
Maximum Working Pressure 345 bar
Flow Factor Kv 0.37m³/h
25 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
58,10
(excl. BTW)
70,30
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 58,10
5 +
€ 56,32
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM sealsCreep resistant bearingsReinforced nylon handleReduced risk of contamination by top and bottom sealsOperating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 barPolished disc.
Hot forged brass gate valve and DZR brass ...
Description:
Hot forged brass gate valve and DZR brass gate valve with forged brass screwed bonnet, non rising stem and solid wedge discManufactured to BS5154/B - PN 20BS1 kitemark approved: License no. KM-06254.
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 barRising StemThreaded bonnetRenewable disc which is suitable for steam serviceBronze trim with glass filled PTFE diskBS21 Taper thread ...
Female screwed type bronze globe valves. These inline ...
Description:
Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. • Rising stem• PTFE renewable disk• High-quality PTFE packing• Body design conditions: PN32• 198°C at 14 bar, 100°C ...