RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V
- RS-stocknr.:
- 125-3567
- Fabrikant:
- RS PRO
Sorry, we konden onze voorraadniveaus nu niet controleren. Probeer de pagina te vernieuwen.
Toegevoegd
Prijs Per stuk
€ 105,36
(excl. BTW)
€ 127,49
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 105,36 |
- RS-stocknr.:
- 125-3567
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
Applications
The EQi controller's compact dimensions, ease of installation and efficency make it suitable for a broad range of applicatiosn including
• Research and development
• Laboratory equipment
• Prototyping
• Production equipment
• Research and development
• Laboratory equipment
• Prototyping
• Production equipment
Specificaties
Kenmerk | Waarde |
|---|---|
| Compatible Pump Type | Brushless Micropump |
| Supply Voltage | 6 → 28V |
| Connection | 2 Screw Terminal (Input), 3 Screw Terminal (Output) |
| IP Rating | IP20 |
| Maximum Output Pressure | 10bar |