Altecnic, 22 mm Compression Brass Y Strainer

  • RS-stocknr. 777-0355
  • Fabrikantnummer 595022
  • Fabrikant Altecnic
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Altecnic Y-Type Strainers

Altecnic 'Y' pattern strainers are suitable for many applications. Using the most efficient design for debris removal, utilising generously proportioned screens, this extends the period before the screen requires cleaning.
The Altecnic 'Y' pattern strainers is designed for use within commercial and domestic applications to protect control valves and other equipment and maintain system efficiency. The strainers are a WRAS approved product for use with potable water and with compression ends are ideally suited for installation in the supply to shower valves and controllers.

Pressure - Temperature rating: 16 bar from 2 to 30°C, 6 bar at 110°C
Strainer mesh size: 15 mm 0.1 mm = 100 μm, 22 & 28 mm 0.4 mm = 400 μm
Body Brass: BS EN 12165 CW614N
Screen: Stainless Steel AISI 304
'O' Rings: Nitrile Rubber

Specificaties
Kenmerk Waarde
Strainer or Filter Strainer
Suitable Media Liquid
Filtration Level 400µm
Connection 22 mm Compression
Body Material Brass
Connection Size 22mm
Maximum Working Pressure 16 bar
Minimum Working Pressure 0bar
Thread Standard or Connection Type Compression
Working Pressure Range 0 16 bar
22 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
16,99
(excl. BTW)
20,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 16,99
5 - 9
€ 16,48
10 +
€ 15,93
Related Products
The Parker 1/4in G nylon disposable inline filter ...
Description:
The Parker 1/4in G nylon disposable inline filter is the smallest disposable filter unit with 11.7ml internal volume. Its maximum flow rate is 5.4SCFM. These models are used in low flow gas or liquid sampling applications, such as liquids to ...
The Parker UCC 1in G PET inline water ...
Description:
The Parker UCC 1in G PET inline water filter is used with Gamma/l solenoid diaphragm dosing pumps. It ensures entrapment of potentially damaging large debris at temperatures up to 60°C. It has a maximum flow rate is 120L/minute.Metering/Dosing pumps:For use ...
The RS PRO Soakaway has been designed to ...
Description:
The RS PRO Soakaway has been designed to fully conform to the latest regulations and has been manufactured to the highest possible standards using the latest material that will not degrade when in contact with acidic waste. The durable housing ...
For the efficient removal of contaminant particles in ...
Description:
For the efficient removal of contaminant particles in liquid pipelines. Easily dismantled for screen cleaning20 bar Maximum Working Pressure at -10°C to 100°C9 bar Maximum Working Pressure at 180°C (Saturated Steam)18//8 Stainless Steel Screen with 0.65mm dia. Perforations NA 1030 ...