- RS-stocknr.:
- 402-005
- Fabrikantnummer:
- MCP402XEV
- Fabrikant:
- Microchip
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27-06-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 32,39
(excl. BTW)
€ 39,19
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 32,39 |
- RS-stocknr.:
- 402-005
- Fabrikantnummer:
- MCP402XEV
- Fabrikant:
- Microchip
Wetgeving en compliance
Productomschrijving
MCP402X Non-Volatile Digital Potentiometer Evaluation Board
The MCP402xEV is a low cost evaluation board that quickly enables the user to exercise all of the features of the MCP402X Non-Volatile Digital Potentiometer. This kit includes 2 PCBs, one populated & one unpopulated. The populated PCB has an MCP4021-103E/SN digital pot configured as a windowed potentiometer using a 2.5kΩ pull-up and a 2.5kΩ pull-down resistor. The PCB supports the 8 pin SOIC, SOT-23-6 and SOT-23-5 MCP402X package variations. A 6 pin PIC10F206-I/OT with FLASH memory is utilized to generate all of the Low-Voltage (LV) and High-Voltage (HV) MCP402X serial commands when the 2 momentary switches are depressed in various sequences. This enables the user to Increment and Decrement the wiper, save the setting to EEPROM & exercise the WiperLocktm feature. The PCB also supports the standard ICSP programming header used by the Microchip BFMP low cost programming tool.
MCP4021/4022/4023/4024 support
Small PCB (3.81x3.81 cm) (1.5x1.5 inch)
One populated PCB: MCP4021-103E/SN configured as a windowed potentiometer, PIC10F206-I/OT with firmware
Sample firmware to interface the PIC10F206 with push buttons & the MCP402X: Interprets momentary switch inputs to determine what serial command to execute, Uses a high-speed oscillator output to create a low-cost charge pump for HV commands, PCB supports In-Circuit Serial Programming using the BFMP programming header
One un-populated PCB for rapid prototyping of an MCP402X application
Sample kit with 1 PIC10F206-I/OT and 2ea of theMCP4021-I/SN (2.1kΩ, 5kΩ,10kΩ & 50kΩ)
Small PCB (3.81x3.81 cm) (1.5x1.5 inch)
One populated PCB: MCP4021-103E/SN configured as a windowed potentiometer, PIC10F206-I/OT with firmware
Sample firmware to interface the PIC10F206 with push buttons & the MCP402X: Interprets momentary switch inputs to determine what serial command to execute, Uses a high-speed oscillator output to create a low-cost charge pump for HV commands, PCB supports In-Circuit Serial Programming using the BFMP programming header
One un-populated PCB for rapid prototyping of an MCP402X application
Sample kit with 1 PIC10F206-I/OT and 2ea of theMCP4021-I/SN (2.1kΩ, 5kΩ,10kΩ & 50kΩ)
Digital Potentiometer - Microchip
Specificaties
Kenmerk | Waarde |
---|---|
Kit Name | Non-Volatile Digital Potentiometer |
- RS-stocknr.:
- 402-005
- Fabrikantnummer:
- MCP402XEV
- Fabrikant:
- Microchip