Microchip MCP130T-300I/TT, Voltage Supervisor 2.92V 3-Pin, SOT-23

  • RS-stocknr. 165-3308
  • Fabrikantnummer MCP130T-300I/TT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MCP130 Microcontroller Supervisory and Reset Circuit

The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.

Features

Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current

Supervisory & Reset Circuits - Microchip

Specificaties
Kenmerk Waarde
Number of Supervisors 1
Output Driver Active Low, Open Drain
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 3
Maximum Reset Active Time 700ms
Dimensions 2.9 x 1.3 x 0.95mm
Height 0.95mm
Minimum Monitored Voltage 2.92V
Maximum Operating Temperature +85 °C
Length 2.9mm
Maximum Monitored Voltage 3V
Width 1.3mm
Minimum Operating Supply Voltage 1 V
Minimum Operating Temperature -40 °C
Maximum Operating Supply Voltage 5.5 V
3000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Reel of 3000)
0,31
(excl. BTW)
0,38
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 +
€ 0,31
€ 930,00
*prijsindicatie