Microchip MCP130T-270I/TT, Processor Supervisor 2.62V 3-Pin, SOT-23

  • RS-stocknr. 165-4887
  • Fabrikantnummer MCP130T-270I/TT
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

MCP130 Microcontroller Supervisory and Reset Circuit

The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.

Features

Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current

Supervisory & Reset Circuits - Microchip

Specificaties
Kenmerk Waarde
Number of Supervisors 1
Output Driver Active Low, Open Drain
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 3
Maximum Reset Active Time 700ms
Dimensions 2.9 x 1.3 x 0.95mm
Height 0.95mm
Maximum Operating Supply Voltage 5.5 V
Maximum Monitored Voltage 2.7V
Width 1.3mm
Minimum Operating Supply Voltage 1 V
Maximum Operating Temperature +85 °C
Length 2.9mm
Minimum Operating Temperature -40 °C
Minimum Monitored Voltage 2.62V
3000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Reel of 3000)
0,31
(excl. BTW)
0,38
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 +
€ 0,31
€ 930,00
*prijsindicatie
Related Products
The MIC2877 is a compact and highly efficient ...
Description:
The MIC2877 is a compact and highly efficient 2MHz synchronous boost regulator with a 6.5A (typical) switch. It features a bidirectional true load disconnect function that prevents any leakage current between the input and output when the device is disabled ...
The MAX17232/MAX17233 offers dual synchronous step-down DC-DC controllers ...
Description:
The MAX17232/MAX17233 offers dual synchronous step-down DC-DC controllers with integrated MOSFETs. They operates over a 3. 5V to 36V input voltage range with 42V input transient protection, and can operate in dropout condition by running at 95% duty cycle. The ...
Linear Technology offer a range of Hot Swap ...
Description:
Linear Technology offer a range of Hot Swap controllers providing circuit protection by limiting inrush current as well as fault isolation. They allow electronic circuit boards and cards to be inserted into live system backplanes. Hot Swap controller will sense, ...
The MIC29150/29300/29500/29750 are high-current, high-accuracy, low-dropout voltage regulators. ...
Description:
The MIC29150/29300/29500/29750 are high-current, high-accuracy, low-dropout voltage regulators. Using proprietary Super βeta PNP® process with a PNP pass element, these regulators feature 350mV to 425mV (full load) typical dropout voltages and very low ground current. MIC29150/29151/29152/29153: ...