RS PRO Splice Protector for use with Optical Network Unit

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RS Pro Splice Protectors

A series of superior quality fusion splice sleeves from RS Pro. These optical fusion splice protectors are designed to protect fibre optic cables after fusion splicing. The splice protectors have a cross linked polyolefin outer tube and a 301 grade stainless steel rod. The clear splices have a 2.5mm OD recovery after shrinking and are available in 45 mm and 60 mm lengths.
Part number 121-4189 60 mm
Part number 121-4190 45 mm

Features and Benefits

Provides strength and protection
Maintains optical properties of the fibres
Sealant protects splice
Easy to use and install
Clear sleeve allowing visual location of splice before shrinking

Specificaties
Kenmerk Waarde
Accessory Type Splice Protector
Length 45mm
Width 2.5 (Dia.)mm
For Use With Optical Network Unit
30300 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 100)
0,231
(excl. BTW)
0,28
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 900
€ 0,231
€ 23,10
1000 - 1900
€ 0,209
€ 20,90
2000 - 4900
€ 0,197
€ 19,70
5000 - 9900
€ 0,186
€ 18,60
10000 +
€ 0,174
€ 17,40
*prijsindicatie
Related Products
From RS Pro a high-quality brush strip or ...
Description:
From RS Pro a high-quality brush strip or brush seal which is a type of draught excluder designed to seal the gap between the bottom of a door and the floor to prevent draughts and keep in heat. As well ...
601 series fibre management interface units for splicing ...
Description:
601 series fibre management interface units for splicing and direct termination of ST and SC connections with multi-mode performance. These 601 series fibre management interface units are wall mounting with a lockable hinged front cover and allow access for patching ...
Hot Melt ST, SC and LC fibre optic ...
Description:
Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre ...
Captive cap for optical link connectors.For use with ...
Description:
Captive cap for optical link connectors.For use with most standard connectors:ST; ST II; SC; FC etc.Effective protection of the ferrule and optic face against shocks, scratches, dust etc.Quickly and easily installed at the end of any fibre optic lead.