Male Crimp Contact 565 Series for use with 565 Series Wire-to-Board Connectors, 565 Series Wire-to-Wire Connectors

  • RS-stocknr. 135-4166
  • Fabrikantnummer 565-290-711P60
  • Fabrikant EDAC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

EDAC IP67 560 Series Contacts and Caps

From EDAC, a range of accessories for the 560 series of connectors. This range includes plug and socket crimp contacts and waterproofing caps. The male and female contacts have phosphor bronze bodies and an overall tin plating. The crimp contacts are available in 20 AWG to 22 AWG and 22 AWG to 28 AWG wire sizes. The waterproofing cap is installed at the wire seal end of the connectors to provide a cover for unused holes. For a suitable crimp tool, see part number 111-9356
Part number 111-9323 Plug contact 22-28 AWG
Part number 111-9325 Plug contact 20-22 AWG
Part number 111-9324 Socket contact 22-28 AWG
Part number 111-9326 Socket contact 20-22 AWG
All contacts in this range are supplied on a strip of 60 • Part number 135-4166 Plug contact 22-28 AWG
• Part number 135-4167 Plug contact 20-22 AWG
• Part number 135-4168 Socket contact 22-28 AWG
• Part number 135-4169 Socket contact 20-22 AWG

IP67 Edac Range

Specificaties
Kenmerk Waarde
For Use With 565 Series Wire-to-Board Connectors, 565 Series Wire-to-Wire Connectors
Accessory Type Male Crimp Contact
Series 565
540 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 60)
0,04
(excl. BTW)
0,05
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
60 - 540
€ 0,04
€ 2,40
600 - 2940
€ 0,039
€ 2,34
3000 - 5940
€ 0,039
€ 2,34
6000 - 14940
€ 0,037
€ 2,22
15000 +
€ 0,036
€ 2,16
*prijsindicatie
Related Products
A range of socket and pin crimp contacts ...
Description:
A range of socket and pin crimp contacts for the Econoseal J series automotive wire connectors. All connectors are designed to be used with thin walled non-irradiated PVC cablesThough designed initially for automotive applications, Econoseal III can be used in ...
Based on DIN 72585, this range of sealed ...
Description:
Based on DIN 72585, this range of sealed connectors has been developed to meet the demand for superior performance. Single piece, formed constructionTin platedWire seals are crimped individually with the contact.
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
Gold plated male and female copper contacts, which ...
Description:
Gold plated male and female copper contacts, which will accept wire sizes of 16-12 awg (1·25-3·0mm²) and 10-8 awg (5·0-8·0mm²).Two Certicrimp tools are available to cover 16-12awg and 10-8awg, and an extraction tool is also available.