Fluke Fluke 710 Multi Function Calibrator 30V dc 24mA

  • RS-stocknr. 181-2322
  • Fabrikantnummer FLUKE-710
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Smart Control Valve Testing is now easier than ever:The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves. Featuring built-in test procedures and an intuitive user interface, the 710 allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics help you make maintenance decisions faster than ever. The valve health quick-check results let you know whether your valve is in good, marginal or in bad operating condition so you can quickly decide whether additional maintenance is necessary. Valve testing and HART communication in a precision loop calibrator:With the 710 Valve Testing Loop Calibrator’s built in HART communication function, users can source a 4-20 mA signal to cause the smart control valve to move, while simultaneously interpreting the valve’s HART feedback signal to determine whether the valve is moving to the expected position. In addition to positional information, the measured pressure delivered from the valve’s internal I/P (which moves the valve) can be determined through the HART communication protocol. The 710 has built-in test procedures that automatically increase and change the mA signal while monitoring the HART position and pressure feedback from the control valve, giving you a better overall picture of valve health at the simple push of a button

Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test, and bump/partial stroke test
Key mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop power, and volts read
ValveTrack™ Software enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory.

Specificaties
Kenmerk Waarde
Maximum Voltage Measurement 30V dc
Maximum Current Measurement 24mA
Port Connections Wire Connection
Battery Life 40 h
Battery Type AAA
Power Source Battery
Dimensions 150 x 90 x 30mm
Weight 300g
Height 30mm
Length 150mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Model Number p Fluke 710
Width 90mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2.159,00
(excl. BTW)
2.612,39
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.159,00
Related Products
Unique mapping function let you calibrate temperature (300 ...
Description:
Unique mapping function let you calibrate temperature (300 °C) or voltage (220 V) directly (instead of 4 to 20 mA indirectly).A multifunction calibrator and an arbitrary function generator.Simulate a current transmitter.4-20 mA (open voltage 24 V) direct source mode.Make a ...
The Fluke 709 Precision Loop Calibrator reduces the ...
Description:
The Fluke 709 Precision Loop Calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Primary ...
Druck DPI 620 GENII IS is an intrinsically ...
Description:
Druck DPI 620 GENII IS is an intrinsically safe easy-to-use and high accuracy multifunction test and calibration system for hazardous areas. It is the IS version of the DPI 620 GENII and replaces the DPI620 IS calibrator, delivering all the ...
Take along the Fluke 725 Multifunction Process Calibrator, ...
Description:
Take along the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to ...