DMC Ratchet Crimping Tool for Type 43 Centre Contact

  • RS-stocknr. 185-6157
  • Fabrikantnummer MH800 (GB109)
  • Fabrikant DMC
Wetgeving en compliance
Land van herkomst: US

DMC MH800 Miniature Special Purpose Crimp Tool

A miniature special purpose crimp tool specifically designed to crimp the centre contact of Type 43 (T43) coaxial connectors with a wire size range of 20 to 32 AWG (miniature to sub-miniature). The MH800 crimp tool from DMC has a lightweight design and uses interchangeable positioners for precision crimping. A fixed position locator and double ratchet action ensure that consistent crimping accuracy and precision are achieved and partial crimps are prevented. The MH800 crimp tool has tight gaging tolerances and also features an indented tip configuration that allows a uniform flow of metal during the crimping operation.

Features and Benefits
• Double action ratchet
• Fixed positioner
• Crimps the centre contact of Type 43
• Tight gaging tolerances

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Computer Interfacing
• Cable assemblies

How easy are they to use?
They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?
This hand tool requires little maintenance. Please be advised that its good practice to keep the indenter tips free of debris. Do not lubricate with oil, this is a precision tool and should be treated as such.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Tooling Information
Crimp tool stock no. 185-6157 will crimp the centre contact, and tool stock no. 185-7734 (with appropriate die set) will crimp the outer ferrule.
Selection of correct die set can be made with reference to the appropriate cable type (see price table).
Tool stock no. 185-7734 is supplied in a carry-case with provision for the storage of die sets. Note that die set stock no. 409-3595 employs a single cavity for crimping type BT54 connectors. This connector does not require the centre contact to be crimped.
Nippers, stock no. 185-9471 for trimming centre conductors of coaxial cables when terminating Type 43 connectors. BT ref: Nippers 3A.
Kenmerk Waarde
Crimp Connector Type Type 43 Centre Contact
Crimp Tool Type Ratchet
Overall Length 190.5mm
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 741,05
Related Products
High quality turned silver and gold crimp contacts ...
High quality turned silver and gold crimp contacts for Han D® insertsThe parallel action crimp tool offers optimal crimp quality and requires the locator, see stock no. 114-7712For service and small assembly the service crimp tool, see stock no. 313-6607, ...
Molex T9999 PremiumGrade series of tools provides the ...
Molex T9999 PremiumGrade series of tools provides the user with various options of high quality tooling to ensure your application is covered. A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision ...