Bulgin C14 Snap-In IEC Plug Male, 10A, 250 V ac

  • RS-stocknr. 202-4963
  • Fabrikantnummer PF0033/15/63
  • Fabrikant Bulgin
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TN
Productomschrijving

10A Double Fused IEC 320 Plug (C14)

250Vac/10A rated, 6.4mm (0.25in) blade terminations
Interlocked fuse drawer accepts 20mm fuse
Fuse drawer protected to PC2, IEC 127 /6

Approvals

UL recognised component, CSA certified, IMQ, SEMKO, VDE

//media.rs-online.com/t_line/L202496-01.gif
//media.rs-online.com/t_line/LD202496-02.gif
//media.rs-online.com/t_line/LD202496-03.gif
//media.rs-online.com/t_line/LE202496-01.gif

Approvals

UL recognised component, CSA certified, IMQ, SEMKO, VDE

Chassis/PCB Plugs - Fused

Note

These fused plugs accept 5 x 20mm fuses

Warning

  • Neutral line must not be fused where it is referenced to earth.
Specificaties
Kenmerk Waarde
IEC Connector Type C14
Mounting Type Snap-In
Gender Male
Current Rating 10A
Body Orientation Straight
Termination Method Solder
Voltage Rating 250 V ac
49 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
298 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
6,33
(excl. BTW)
7,66
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 6,33
10 - 24
€ 6,07
25 - 49
€ 5,82
50 +
€ 5,57
Related Products
Fused IEC inlet connector accepting 20mm fusesFuse link ...
Description:
Fused IEC inlet connector accepting 20mm fusesFuse link is electrically separate to connectorConnection via 0.25 push on tagsFuse carrier is interlocked and cannot be removedStorage for one spare fuseRated at 240Vac/10ADepth 35mmSuitable hole cutter stock no. 542-302Use insulating boot stock ...
Interlocked fuse drawer accepts 20mm fusesFuse link electrically ...
Description:
Interlocked fuse drawer accepts 20mm fusesFuse link electrically connected wire direct to plug using type 250 (0.25in) blade receptacles250Vac/ 10A rated, BS4491 compliantFlammability Rating UL94 V-0Use insulating boot stock no. 801-932.
These male panel mount sockets with 5 x ...
Description:
These male panel mount sockets with 5 x 20-mm / double-pole fuse holders are clipped on using harpoons located on the side (SNAP-IN mounting).Connection via Faston terminals.(6.3 x 0.8 mm).Panel mounted with 1.5 mm maximum thickness.C14 type connector.
Socket modules for electrical apparatus, fitted with a ...
Description:
Socket modules for electrical apparatus, fitted with a control switch.These modules clip into a panel with a maximum thickness of 1.5 mm and are available with three different switches, black or illuminated in red or green.Blade termination.