JST YC Ratchet Crimping Tool

  • RS-stocknr. 392-7166
  • Fabrikantnummer YC-122R
  • Fabrikant JST
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

JST YC-122R Hand Crimping Tool for SHF Crimp Terminals

Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

JST YC-122R Hand Crimping Tool - Overview

From JST a durable, reliable and easy to use hand operated crimping tool made from high quality materials. This hand tool consists of two handles, a ratchet mechanism and a precision ground die assembly with two crimping cavities

Ratchet Mechanism

The ratcheti is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles will re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps

Key Features and Benefits

• Durable and easy to use
• Precision ground dies
• Ratchet mechanism ensures full crimp cycle is achieved
• Wire stop for accurate terminal positioning

Questions and Answers

What Terminals can this Crimping Tool be used with?
This hand crimping tool is designed for crimping JST SHF-001T-0.8BS uninsulated open barrel crimp terminals that accept a 28 AWG to 22 AWG wire size onto cable

JST Hand Crimping Tools

Specificaties
Kenmerk Waarde
Series YC
Crimp Tool Type Ratchet
Primary Keyword Crimping Tool
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each
504,95
(excl. BTW)
610,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 504,95
Related Products
Suitable for QM single and two piece contacts. ...
Description:
Suitable for QM single and two piece contacts. Plier tool can also be used to crimp contacts for the Circular Sealed Industrial IP67 connector range and the Sealed Industrial IP68 connector range stock no. 489-526. Instructions supplied with tools. RF ...
The Harting ratchet-type manually operated FC-2 connector type ...
Description:
The Harting ratchet-type manually operated FC-2 connector type crimping tool structures a fixed die (crimper), a movable die (anvil), a locator/insulation stop and a ratchet. It is a tool used to join or connect two pieces of material by compression. ...
Connectors used to supply storage units for micro ...
Description:
Connectors used to supply storage units for micro and mini-computers (floppy and hard disk).4-way free-mounted enclosures (wire to wire).Receive crimp contacts, which are to be ordered separately (in bulk by the 100).Note:Male units receive female contacts and vice versa.
CERTI-CRIMP premium grade C-Head straight action hand tool ...
Description:
CERTI-CRIMP premium grade C-Head straight action hand tool consisting of a head with a stationary die holder and a moving die holder with handles and a ratchet. The interchangeable die sets used with this crimp tool need to be purchased ...