FTDI Chip USB to RS232 (Quad) Adapter Board, USB-COM232-Plus4

  • RS-stocknr. 687-7742
  • Fabrikantnummer USB-COM232-Plus4
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TH
Productomschrijving

FTDI Chip USB To Rs485 Adapter Board

The FTDI chip USB to RS232 adapter board incorporates FTDI’s FT4232H USB 2.0 Hi-Speed serial bridge chip. It handles all the USB signalling and protocols. The adaptor provides a fast and simple way of adapting four legacy RS232 serial devices to the modern USB port. The integrated electronics circuit utilise the FTDI FT4232H plus four RS232 level shifters and TXD/RXD LEDs to provide a visual indication of data traffic through the module. It uses a standard USB mini-B device connector for connection to an upstream host or hub port. This board supports Windows Server 2008, 2003, Vista, XP, 2000, Windows CE, Linux, and Mac OS X.

Features and Benefits

Adds four RS-232 serial ports by connecting to Hi-Speed USB 2.0 interface
COM port number can be changed to any available COM port number to support HyperTerminal or any other serial communications software application running in Windows
Data transfer rate is up to 1Mbps
Easy plug & play installation
Installs as four standard Windows COM ports
LEDs indicate USB Enumeration, RxD, TxD for monitoring port status and easy diagnostics
Operating temperature ranges between -40°C and 85°C
Powered by USB port, no external power adapter required
Two modes: Echo and non-Echo

Applications

Communication
Embedded system

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Kit Classification Development Kit
13 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
48,55
(excl. BTW)
58,75
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 48,55
5 - 9
€ 46,13
10 - 19
€ 43,86
20 - 49
€ 41,61
50 +
€ 39,58
Related Products
The LC231X module provides a low cost USB ...
Description:
The LC231X module provides a low cost USB to UART bridge using the FT231X IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The MikroElektronika RS232 2 click board performs full ...
Description:
The MikroElektronika RS232 2 click board performs full RS232 to Universal Asynchronous Receiver-Transmitter (UART) signal conversion. The MIKROE-2897 click features an On-board Surface Mount Device (SMD) jumper that allows selection of power supply voltage between 3.3V and 5V. This click ...
The UMFT240XA is a development module that converts ...
Description:
The UMFT240XA is a development module that converts USB to serial 8-Bit 245 FIFO data interfaceAsynchronous and Synchronous bit bang interface modes are availableSmall PCB assembly module designed to fit a standard 7.62mm (0.3”) wide 24-pin DIP socketOn board USB ...
The UMFT201XA is a development module that converts ...
Description:
The UMFT201XA is a development module that converts USB to I²C two-wire serial bus interfaceSmall PCB assembly module designed to fit a standard 7.62mm (0.3”) wide 16-pin DIP socketOn board USB "mini-B" socket allows the module to be connected to ...