FTDI Chip USB to RS485 Adapter Board, USB-COM485-Plus1

  • RS-stocknr. 687-7746
  • Fabrikantnummer USB-COM485-Plus1
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

USB-COM-PLUS Modules

The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports.

Versions Available:

(687-7730) USB-COM232-Plus1 - USB to RS232 Adapter
(687-7749) USB-COM232-Plus2 - USB to Dual RS232 Adapter
(687-7742) USB-COM232-Plus4 - USB to Quad RS-232 Adapter
(687-7752) USB-COM422-Plus1 - USB to RS422 Adapter
(687-7761) USB-COM422-Plus2 - USB to Dual RS422 Adapter
(687-7764) USB-COM422-Plus4 - USB to Quad RS422 Adapter
(687-7746) USB-COM485-Plus1 - USB to RS485 Adapter
(687-7755) USB-COM485-Plus2 - USB to Dual RS485 Adapter
(687-7758) USB-COM485-Plus4 - USB to Quad RS-485 Adapter

The FTDI Chip USB-COM485-Plus1 is a USB to RS485 adapter board. It provides a straight-forward way to convert older devices with as RS485 interface to more up-to-date USB ports. The USB-COM485-Plus1 features RS485 level shifters and the FT232R USB-Serial bridge IC which enables the conversion.

There are 3 LEDs on the USB-COM485-Plus1. A yellow LED indicates when the board is configured and ready. A green LED represents TxD activity when the data is transmitted to the RS485. Finally, there is a red LED which is for the same but with RxD activity.

What connectors are on-board?
1 x 12Mbps USB type B 2.0 male connector
1 x DE-9P male connector
Note: it works with USB 1.1 and 2.0 host and hub ports

What is the maximum data rate?
The maximum RS485 level data rate is 3Mbps.

Specificaties
Kenmerk Waarde
Interface Function USB to RS485
Kit Classification Adapter Board
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
132 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
24,49
(excl. BTW)
29,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 24,49
5 - 9
€ 23,27
10 - 19
€ 22,11
20 - 49
€ 21,02
50 +
€ 19,96
Related Products
The Silicon Labs CPT112S TouchXpress Evaluation Board has ...
Description:
The Silicon Labs CPT112S TouchXpress Evaluation Board has 12 capacitive touch sensitive pads with an optional 4 channel touch slider together with a buzzer to confirm touch. The CPT range is designed to make the switching from traditional buttons to ...
This board is dedicated to receiving power with ...
Description:
This board is dedicated to receiving power with USB Type-C Power Delivery and requests the maximum voltage from the voltage profile (PDO) that the powersupply side has. If you want to check the operation of Power Delivery, please prepare power ...
The FTDI Chip TTL-232x USB to Serial UART ...
Description:
The FTDI Chip TTL-232x USB to Serial UART (TTL level) converter cables provide a simple and fast way to convert microcontroller UART serial I/O to USB. The TTL-232R contains a small circuit board which includes the FT232x chip. Encapsulated in ...
The UMFT201XA is a development module that converts ...
Description:
The UMFT201XA is a development module that converts USB to I²C two-wire serial bus interfaceSmall PCB assembly module designed to fit a standard 7.62mm (0.3”) wide 16-pin DIP socketOn board USB "mini-B" socket allows the module to be connected to ...