Fluke TP220-1 Test Probe Kit, CAT II 1000 V

  • RS-stocknr. 726-3630
  • Fabrikantnummer TP220-1
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

Fluke Multimeter Test Leads and Probes

Brought to you by Fluke, a range of Test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

Features and Benefits

• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

What are test leads?

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

What are test probes?

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

TP220-1 Industrial Probe Set

Standards

CAT II 1000V

Specificaties
Kenmerk Waarde
Lead Type Test Probe Kit
Current Rating 10A
Safety Category Voltage 1000V
Safety Category CAT II 1000 V
Safety Category Level CAT II
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
37 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
21,00
(excl. BTW)
25,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 21,00
Related Products
A pocket sized meter with the following features:. ...
Description:
A pocket sized meter with the following features:. Clear 3200 count LCD display, incorporating legends to indicate function selected5 functions/16 rangesAutoranging on volts and resistance ranges up to 450V ac or dc and 32MΩData holdContinuity test bleeperDiode test functionTÜV approved ...
Banana plugs fit all standard 4mm banana jacks. ...
Description:
Banana plugs fit all standard 4mm banana jacks. Spring loaded, clear retractable banana sheath provides electrical protection when cable is not mounted and slides out of the way when pressed into a non-insulated Jack. Built in Jack will accept any ...
Test probes offering ease of use and complete ...
Description:
Test probes offering ease of use and complete safety.These probes are fully compatible with all 4 mm diameter safety terminals.The visible metal part is limited to 19mm to prevent any risk of short-circuit. However, its shape allows access to the ...
1000:1 voltage divider type high voltage probeFor EHT ...
Description:
1000:1 voltage divider type high voltage probeFor EHT checking with any digital multimeter on voltage ranges with 10MΩ input resistance4mm shrouded safety plug connectors and earthing crocodile clip90cm ground lead length; 1m cable length.