Panasonic DIP Switch, SPST-NO, 10 mA @ 5 V dc

  • RS-stocknr. 756-1410
  • Fabrikantnummer ESE11MH1T
  • Fabrikant Panasonic
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Panasonic Detector Switches - ESE Series

Detector Switches are used to detect mechanical movements and convert those or human manual operations, such as the closing of a mobile phone, to electronic signals. In some applications Detector Switches have been used to replace Encoders as a low cost solution.
This range of Detector Switches use a mechanical sliding spring design to ensure consistent signal output. They also have features that include long travel, thin profile, small size, various actuation angles and surface mount or J-bent terminal mounting options.
Detector Switches can be used in many applications that require detection of mechanical movement, e.g. battery insertion and door closure in hand held devices, consumer electronics, computer/peripherals, telecommunications, appliances, instrumentation and many more.

Industry’s smallest and thinnest switches
Low actuation force
Single pole with normally open or normally closed contacts
Reflow soldering (apart from stock number 756-1410 which can be wave soldered)

Detector Switches

Specificaties
Kenmerk Waarde
Contact Configuration SPST-NO
Mounting Type Surface Mount
Actuator Type Plunger
Contact Current Rating 10 mA @ 5 V dc
Minimum Operating Temperature -10°C
Maximum Operating Temperature +70°C
710 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
0,333
(excl. BTW)
0,403
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
€ 0,333
€ 3,33
250 - 490
€ 0,265
€ 2,65
500 - 990
€ 0,245
€ 2,45
1000 - 2490
€ 0,215
€ 2,15
2500 +
€ 0,205
€ 2,05
*prijsindicatie
Verpakkingsopties
Related Products
The SDS series of micro miniature detect switches ...
Description:
The SDS series of micro miniature detect switches from C & K. Typical applications include consumer electronics, medical devices, ATCA and MicroTCA devices. Low profile package sits just 2mm off PCB2mm over travel ideal for detector applicationsLow actuation forceMinimum operating ...
Two Monolithic Unipolar Hall Switches Operation with a ...
Description:
Two Monolithic Unipolar Hall Switches Operation with a North Pole (Output1) to Part Marking Surface Operation with a South Pole (Output2) to Part Marking Surface Supply Voltage of 1.6V to 3.6V Micropower Operation Dual Outputs for Independent Pole Detection for ...
Slide actuated SPST DIP switches with tin plated ...
Description:
Slide actuated SPST DIP switches with tin plated phosphor bronze contacts and a nylon UL 94V-0 housing. These SPST DIP switches are through hole mounting with a 2.54 mm centreline and have top operating red slide actuators. Electric life: minimum ...
The GLC series and GLD series of limit ...
Description:
The GLC series and GLD series of limit switches from Honeywell are a compact and versatile solution. The small size of the unit allows you to use them in applications and environments with a limited amount of space. These limit ...