Tektronix TCP0030A Oscilloscope Probe, Probe Type: Current 120MHz

  • RS-stocknr. 781-0807
  • Fabrikantnummer TCP0030A
  • Fabrikant Tektronix
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Tektronix Oscilloscope Probes

The Tektronix current oscilloscope probe is designed for direct connection to oscilloscopes with the probe interface. This AC/DC current measurement probe provides greater than 120MHz bandwidth with selectable 5A and 30A measurement ranges. It also provides exceptional low current measurement capability and accuracy to current levels as low as 1mA.

Features and Benefits

Bandwidth is DC to 120MHz
Rise time is 2.92ns
Maximum DC and RMS current is 30A
Maximum peal pulse voltage 50A
Maximum Input voltage is 150V CAT II
Split-core construction allows easy circuit connection
Typically less than 1% DC gain error
Low noise and DC drift
Easy to Degauss and Autozero
set-up controls and probe status/diagnostic indicators on probe hardware and via oscilloscope UI display menu
Intelligent communication with TekVPI™ oscilloscopes provides:
-Units scaling and readout. Automatic, on-screen readout of amps and magnitude. Manual set-up is not required Hand calculation from volts to amps is unnecessary
-Push button degauss and Autozero functionality
-Probe status and diagnostic indicator LEDs
-Remote GPIB/USB probe control

Applications

Power supply design
Design motor drive
Electronic ballast
Power semiconductors
Switch mode control
UPS systems
Power converters
Mobile communications
Motor drives
Industrial/consumer electronics

Certifications

CE compliant
WEEE compliant

Specificaties
Kenmerk Waarde
Probe Type Current
Safety Category CAT II 150 V, CAT II 300 V
Series TCP
Safety Category Level CAT II
Model Number p TCP0030A
Safety Category Voltage 150 V, 300 V
Bandwidth 120MHz
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4.490,00
(excl. BTW)
5.432,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 4.490,00
Related Products
MDO3000 oscilloscopes are designed to meet users' needs ...
Description:
MDO3000 oscilloscopes are designed to meet users' needs and aspirations now and into the future. Each model is multi-functional with integrated basic spectrum analyzer, Wave Inspector Navigation, MSO, serial and parallel bus triggering and analysis, and digital voltmeter. Optional instrument ...
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ...
Description:
Bandwidth DC-70 MHzRise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput impedance ...
The Digilent BNC terminated oscilloscope probe is perfect ...
Description:
The Digilent BNC terminated oscilloscope probe is perfect to use with the Analogue Discovery™ in conjunction with the Discovery BNC adapter. • Bandwidth for 1x DC to 6MHz and 10x DC to 100MHz • Selectable 1X/10X input attenuation• Input resistance ...
For design, validation, debugging and characterization of common ...
Description:
For design, validation, debugging and characterization of common high-speed serial bus designs including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, FireWire (1394b); signal integrity, jitter and timing analysis; manufacturing engineering and test. Accurate measurements for serial and digital ...