Winslow 2.54mm Pitch Vertical 24 Way, Through Hole Turned Pin Open Frame IC Dip Socket, 5A

  • RS-stocknr. 801-780
  • Fabrikantnummer W30524/3TRC
  • Fabrikant Winslow
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Turned Pin, DIP Sockets

Winslow brings you a series of high quality machined DIP sockets. They are an open frame type of socket and are made from a PBT housing for reliability. The contacts are gold over nickel-plated (0.3μm) with beryllium-copper inner contact with a tin-plated brass outer shell. They are rated up to 1000 insertions.


These IC DIP sockets are brilliant use for non-permanent development work, they will allow you to debug your system before any permanent soldering takes place.

Low profile high-quality machined contact DIP sockets comprising a four-finger (0.3μm)gold over nickel-plated beryllium-copper inner contact with a tin-plated brass outer shell.
Temperature Range: -55°C to +125°C
Insertions: 1000

Need more DIP sockets?

813-109 6 way turned, 0.3in pitch
813-115 8 way turned, 0.3in pitch
813-121 14 way turned, 0.3in pitch
813-137 16 way turned, 0.3in pitch
813-143 18 way turned, 0.3in pitch
813-159 20 way turned, 0.3in pitch
813-165 22 way turned, 0.4in pitch
801-780
24 way turned, 0.3in pitch
813-171 24 way turned, 0.4in pitch
801-803 32 way turned, 0.6in pitch
813-200 64 way turned, 0.9in pitch

Specificaties
Kenmerk Waarde
Number of Contacts 24
Mounting Type Through Hole
Pin Type Turned
Pitch 2.54mm
Row Width 7.62mm
Frame Type Open Frame
Termination Method Solder
Contact Plating Gold, Tin
Current Rating 5A
Orientation Vertical
Length 30.4mm
Width 10.14mm
Depth 3mm
Dimensions 30.4 x 10.14 x 3mm
Minimum Operating Temperature -65°C
Housing Material Glass Fibre Reinforced PET
Contact Material Beryllium Copper
Maximum Operating Temperature +150°C
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
455 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,796
(excl. BTW)
0,963
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 70
€ 0,796
€ 3,98
75 - 245
€ 0,636
€ 3,18
250 - 495
€ 0,634
€ 3,17
500 - 1245
€ 0,564
€ 2,82
1250 +
€ 0,516
€ 2,58
*prijsindicatie
Related Products
W3100 series DIL stamped IC sockets with a ...
Description:
W3100 series DIL stamped IC sockets with a low profile end and side stackable design making them ideal for use in high density circuit layouts. These W3100 DIL IC sockets have tin-plated dual wipe contacts that offer maximum contact retention ...
Low profile high-quality machined contact d.i.l. sockets comprising ...
Description:
Low profile high-quality machined contact d.i.l. sockets comprising a four-finger (3 to 5 microns) tin over nickel-plated beryllium-copper inner contact, with a tin-plated brass outer shell.Temperature Range: -55°C to +150 °C.
These sockets have the same specification as the ...
Description:
These sockets have the same specification as the Type 3, low profile versions, but with super flat hollow tail contacts which allow the height of the IC above the PCB to be reduced, as the IC can sit lower in ...
Precision DIP sockets with gold plated 'tulip' grip ...
Description:
Precision DIP sockets with gold plated 'tulip' grip contacts & tin plated pinsPrevents capilliary action with solder & flux on PCB'sOpen frame construction maximises heat dissipationTemperature Range: -65°C to +125°CContacts: Beryllium copper Pins: Brass100 Cycles (Contact Life)Insulation Resistance: 5 x ...