Silicon Labs 12-pad Capacitive Touch Evaluation Board for CPT112S

  • RS-stocknr. 914-0040
  • Fabrikantnummer SLEXP8008A
  • Fabrikant Silicon Labs
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

CPT112S TouchXpress Capacitive Touch Evaluation Kit

The Silicon Labs CPT112S TouchXpress Evaluation Board has 12 capacitive touch sensitive pads with an optional 4 channel touch slider together with a buzzer to confirm touch. The CPT range is designed to make the switching from traditional buttons to capacitive touch buttons as simple as possible.

The board can be connected to a host processor using the expansion header or breakout pins or connect to a PC using USB. This Evaluation Board is pre-loaded with software demos and interfaces with all EFM8™ and EFM32™ families of MCUs.

Although capacitive sense requires complex technology these devices are not complicated to use or adapt to your needs. Using Silicon Labs Simplicity Studio you can easily configure the device to your requirements. It also provides real time profiling to aid rapid development. Integrate the CPT112S capacitive sense buttons and slider by interfacing into an I²C interface.

Silicon Labs CPT devices continuously monitor the touch pads enabling the main processor to remain in sleep mode for longer to reduce overall power consumption. Low-power usage and a small form factor make them ideal for modern, portable designs. Available in 20-pin QFN packages and just 3 x 3 mm.

A 7 capacitive sense pad version without a slider is also available from RS:

Silicon Labs CPT007B Capacitive Touch Evaluation Kit (RS 914-0031)

Human Machine Interface (HMI), Silicon Laboratories

Specificaties
Kenmerk Waarde
User Interface Capacitive Touch
Featured Device CPT112S
Kit Classification Evaluation Board
Kit Name 12-pad
57 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
17,07
(excl. BTW)
20,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 17,07
Related Products
The Silicon Labs TS1108 coulomb counter measures the ...
Description:
The Silicon Labs TS1108 coulomb counter measures the current your circuit is using and is perfect for measuring battery depletion. The TS1108 uses a voltage to frequency converter to send a series of 90 μs output pulses to COUT. This ...
The GPS3 click mikroBUS™ board allows the user ...
Description:
The GPS3 click mikroBUS™ board allows the user to add GPS to their application without an external antenna. The combination of the L80 GPS module with EASY™ and AlwaysLocate™ technologies enable the calculation and projection of orbits and energy optimisation. ...
The Click accessory modules plug into the mikroBUS ...
Description:
The Click accessory modules plug into the mikroBUS sockets in MikroElektronika microcontroller development boards. IR gesture click has an APDS-9960 sensor which features an LED, four directional photodiodes and a gesture engine. The engine calculates the velocity, direction and distance ...
The Joystick click is an add-on board that ...
Description:
The Joystick click is an add-on board that helps you to add a joystick to your design. Perfect applications for the Joystick click include mobile phones, MP3 players, GPS receivers and gaming consoles.Key Features of the Joystick click•mikroBUS™ pinout standard•A55013 ...