RS PRO White PTFE Tape 12mm x 5m x 0.2mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: NL
Productomschrijving

RS PRO PTFE Extra Thick PTFE Tape

This exceptional RS PRO Extra thick PTFE thread seal tape is also called plumbers tape or thread seal tape and is often used piping and ductwork application for sealing threaded pipe joints. Its non-adhesive backing makes it easy to handle, and the extra thick tape allows for a smaller overlap. The tape is sold cut to specific widths and wound on a spool which makes it easy to wind around your pipe threads.

Some of PTFE’s key material characteristics are the fact that it’s both extremely low friction, and is hydrophobic (meaning it repels water). This makes PTFE tape incredibly useful for a wide range of plumbing and pipework jobs with pipe fittings etc.

Features and Benefits

Extra thick PTFE tape designed for sealing threads in just one wrap

Only requires 50% overlap on the thread for BS21 thread up to 2 inches.

Suitable for more aggressive environments where acids, gases or solvents may be present

Easy to apply and handle

Robust pressure resistant

FAQ's

Where would you use RS PRO PTFE tape?

The RS PRO PTFE tape can be used when fitting compression joints and is widely used by plumbers and DIY enthusiasts on radiator valves and taps.

How much PTFE tape to use?

To create a good seal wrap the tape it only requires a 50% overlap round the components to create a better seal.

How to use RS PRO PTFE Tape?

• Always clean the thread pipes before beginning to apply your tape
• Wrap the tape in the direction of the threaded spiral of the male thread, always beginning with the first thread. Wrapping the wrong way may result in it coming unwound as you tighten the fitting. Do not overhang the tape
• Keep the edge of the tape parallel to the face of the fitting and wrap all the threads
• When you have wrapped enough tape around, cut or tear off the excess
• Press firmly to ensure the tape lies flat
• Tighten the male end connection into the female end connection

Approvals

BGC IM/16, BS 6974: 1989, BS5292 Type C tests, BS7786 1995 Grade H

Specificaties
Kenmerk Waarde
Width 12mm
Thickness 0.2mm
Length 5m
Colour White
Minimum Operating Temperature -200°C
Maximum Operating Temperature +260°C
808 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1394 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
2,84
(excl. BTW)
3,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 2,84
6 - 14
€ 2,73
15 +
€ 2,68
Related Products
This 710 Conductive Aluminium Foil Tape from Hi-Bond ...
Description:
This 710 Conductive Aluminium Foil Tape from Hi-Bond features a conductive, single-coated acrylic adhesive with a uniform dispersion of conductive particles. Shielding or repair of signal cable Blinding the end of knitted wire mesh of shielding cable Shield leaking or ...
This 750 Double-Sided Conductive Aluminium Foil Tape from ...
Description:
This 750 Double-Sided Conductive Aluminium Foil Tape from Hi-Bond features a dual-layer of conductive acrylic adhesive with a uniform dispersion of conductive particles. Shielding or repair of signal cable Blinding the end of knitted wire mesh of shielding cable Shield ...
AT160 is a polythene extruded matt cloth tape ...
Description:
AT160 is a polythene extruded matt cloth tape with a waterproof finish coated with an aggressive pressure sensitive adhesive. Polycoated waterproof cloth tapeVery good long term resistance to outdoor exposureVery strongConformable to awkward shapesGood abrasion and puncture resistanceWritable surfaceNon-corrosive ...
High performance matt "gaffer" tape, ideal for securing ...
Description:
High performance matt "gaffer" tape, ideal for securing and bundling cables, colour coding on lighting and mixing desks etc. Ultra matt 'writable' surface finish, minimises light glare and reflectionCable friendly adhesive - peels clean from cables and most other surfacesEasy ...