Push Button Boot, for use with MPG Series, MSP Series,Black

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

TE Connectivity - MPG Series Switch

TE Connectivity MPG series of miniature Push Button switches are available in a choice of SPDT or DPDT contact configurations with momentary switching function and solder terminals.
MPG switches are designed to be panel mounted. They have a contact resistance less than 10mΩ and an insulation resistance greater than 1000MΩ. They are epoxy sealed with a flux proof construction.
Accessories for the MPG miniature Push Button switches include a brass chromium-plated bezel and a 15mm diameter black actuator button, see stock numbers 134-2462 and 7830053 respectively.

Momentary or alternate switching
Maximum switch rating of 6A at 125Vac, 3A at 250Vac
Gold flash over silver clad copper contacts
M6 bush
Solder terminals
Contact resistance <10mΩ maximum
Dielectric strength 1500Vac for 1 minute
Insulation resistance 1000MΩ minimum
Mechanical life >50,000 operations
Operating temperature range -20 to +80°C

Note

Actuator button is not supplied with the switch and must be ordered separately. For a suitable 15mm black button see stock number 7830053
Momentary switches have the momentary state displayed in brackets, e.g. on - (on).

Specificaties
Kenmerk Waarde
Accessory Type Sealing Boot
For Use With MPG Series, MSP Series
Colour Black
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
4,44
(excl. BTW)
5,37
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 4,44
10 - 24
€ 4,12
25 - 49
€ 4,06
50 - 149
€ 4,02
150 +
€ 3,96
Related Products
Two-part seal assemblies which may be fitted either ...
Description:
Two-part seal assemblies which may be fitted either to switches or indicators to protect against contamination from liquids, dust, dirt, etc.The base is fitted to the switch prior to assembly to the front panelThe flexible transparent vinyl membrane is clipped ...
From Apem, this 1200 series push-button switch is ...
Description:
From Apem, this 1200 series push-button switch is single pole with a momentary action and a low-resistance plunger style actuator. Panel mounting and featuring 0.250in faston terminals, this Apem switch is easy to install.A push button boot (stock no: 103-6303) ...
Sealing hoods for a variety of toggle & ...
Description:
Sealing hoods for a variety of toggle & pushbutton switches offering protection against water, dust & dirt.
Ideally suited for use as an enabling switch ...
Description:
Ideally suited for use as an enabling switch for manual robotic control, the function accomodates a panic situation wherein the operator can release or squeeze for the switch off position. The contact will not close when released from "Off" position ...