Idec YW Illuminated Yellow Push Button Complete Unit NO Momentary

  • RS-stocknr. 168-2597
  • Fabrikantnummer YW1L-M2E10Q4Y
  • Fabrikant Idec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

From miniature pilot lights and industrial switches that mount into 8mm panel cut outs through full size industrial switches that mount into 30mm cutouts, we have an industrial switch or indicator for almost any application. Terminations include solder / quick connect terminals, screw terminals, or PC board pins for direct board mounting. Miniature models use snap action gold plated contacts for superior low level switching, whereas larger models use slow-make, double break contacts for switching heavier loads, up to 10A.

Compact and light-weightFinger-safe screw terminals

22MM YW Series Illuminated Pushbuttons (Plastic Bezel) Momentary Mushroom LED

Specificaties
Kenmerk Waarde
Push Button Colour Yellow
Cutout Diameter 22mm
Series YW
Push Button Actuation Momentary
Contact Configuration NO
Push Button Style Extended
Illuminated Yes
IP Rating IP65
Maximum AC Voltage 24V
Maximum DC Voltage 24V
Push Button Shape Round
Mounting Type Panel Mount
Push Button Diameter 23.6mm
Body Material Plastic
Maximum Operating Temperature +55°C
Minimum Operating Temperature -20°C
Maximum Current 10 A
Terminal Type Screw
Push Button Marking Unmarked
4 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
13,04
(excl. BTW)
15,78
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 13,04
Related Products
Eaton C22 compact push buttons with flying lead ...
Description:
Eaton C22 compact push buttons with flying lead offers an array of functional, attractive, and ergonomically designed all-in-one push buttons. C22 series all-in-one design with integral contact block and operator provides a simple solution for all push button requirements. Available ...
The CW series gives a sleek, stylish image ...
Description:
The CW series gives a sleek, stylish image to your machines or control panels. The surface is safer with less chance of unexpected operation or accidents by hitting the projections, and also is cleaner with less dust build-up. Flush silhouette ...
Panel mounting for use in Zone 1 hazardous ...
Description:
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built ...
A selection of Harmony XB4 series of chromium ...
Description:
A selection of Harmony XB4 series of chromium plated metal control and signalling units designed for use in the most extreme environments. Supplied with several different profile colouring heads including red, orange and yellow which can be used to identify ...